For easy storage and transportation. Coated nylon bag with cylinder shape for tight controlled fit will hold 8", 12", or 16" duct, up to 25'. Features double zipper for ease of access, reinforced carry handle and shoulder strap.
Allegro’s flow meters are separate from the pump to allow the user to set the flow for more than one pump with the same meter. Features an expanded scale and includes necessary adapters for use with particulate cassettes.
Lead-This 37mm, MCE cassette is .8µm mixed cellulose ester and is specifically designed for lead sampling. TEM-This 25mm, .45µm + -5.0µm cassette is designed for asbestos final clearance testing. The cassettes incorporate a 2" static conductive extension cowl and meets all applicable standards. PCM-A 25mm cassette with .8µm pore size for asbestos sampling. The high quality cassette incorporates a 2" cowl and meets stringent quality standards.
Cost effective ambient air pumps protect workers in supplied air environments. Special design supplies clean, breathable air to NIOSH approved respirators. Pumps are portable and oil-less for convenience. Produce no carbon monoxide, oil vapor, or oil mist, thus eliminating the need for carbon monoxide monitoring and alarm systems. Easy to maintain - only 1 moving part. Rotary vane pumps use 4 carbon vanes that last for 5,000 to 15,000 hours of continuous running.
The Remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel.
Attached to any air source or filter panel, the Remote CO Monitor alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm (5ppm Canada). The CO monitor can be operated in AC or DC mode and uses a single 9-volt alkaline battery. Maximum regulator inlet pressure is 150 psi. Comes with coupling pigtail.
This Point-of-Attachment (POA) Air Control System connects to any breathing air source. It’s housed in a Pelican carry case that can be wall-mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure is 150 psi.
Give your workers a portable filtered air source for greater mobility in the workplace. Air filtration panels are designed to provide from 1 to 5 airline respirators up to 30 or 60 cfm of breathable air ranging from 5-125 psi. Unique 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants as small as .003 microns in diameter. Should be used with case closed to avoid damage to sensitive inner parts.
Used to test the accuracy of the CO Monitor on Allegro’s CarryAir, Wall-Air or Oil-Less Compressor. Kit includes a 17 liter cylinder each of oxygen and CO, a constant flow pressure regulator with gauge and tubing in a plastic carrying case
The unique design of this panel allows each regulator to be individually adjusted at different pressure settings, allowing as well, separate outlets for air tools. The viewing window on the case allows monitoring of pressure gauges. A 16 gauge steel stand for support is included as well as all brass plumbing with quick-disconnect Hansen couplers.
