Reduces forces by as much as 50%-80%. Rugged 6' lanyards feature a special shock absorbing inner core surrounded by a super-strong outer jacket. When a fall occurs, the outer jacket extends full length and acts as a backup web lanyard, while the inner core extends to reduce force. Unique warning flag pops out to indicate when lanyard has been involved in a fall and should be removed from service. Available in single or dual leg.
Roofing kits from Miller are easy to install and can be used on either steep pitched or flat surfaced roofs. Kits are complete and ready to use for one person. Each kit comes with model E850/UGN DuraFlex harness, steel twist lock carabiner, manual stainless steel rope grab with 2ft. web lanyard with shock absorber, nylon rope, and carrying bag. RA10 kit comes with 12 single use anchor with hardware and RA20 kit comes with 2 reusable anchors with hardware.
Offers great worker maneuverability. Feel secure with this reliable lanyard. Stretchable design extends from 4'-6' for greater maneuverability with less chance of tripping, snagging, dragging when fully contracted. Shock absorbing inner core reduces the force of a fall by 50% - 80% compared to traditional rope, webbing or steel lanyards. Tough, heavy-duty outer jacket serves as a back-up strap for added safety.
Anchorage connectors are designed as the intermediary for securing a connecting device to an anchorage. Model 415 is a 1/2 inch diameter D-bolt, 1-1/4 inch long, one-piece unit with lock washer and nut. Model 416 D-bolt anchor is for up to 4 inch working thickness and includes a 5/8 inch diameter bolt with lock washer and nut.
Stainless steel Wire Hook connects to various approved anchorages including railings, small I-beams, angle iron and scaffolding. Simply squeeze the spring-loaded hook and slip the large opening over the approved structure. 400 lbs maximum capacity. Complies with OSHA and ANSI Standards.
This reusable anchor is designed for use in cured concrete with a compression strength of 3000 psi. Can be used either vertically or overhead and has a 400 lbs maximum working capacity. The 496 has a 5,000 lb capacity. The 497 has a 10,000 lb capacity for single user only unless used with the SkyWalker Horizontal Lifeline System for up to 2 people. Complies with OSHA and ANSI Standards.
Designed specifically for women. Specially designed harness is extremely comfortable to wear, provides improved support and will increase compliance and worker productivity. Features bright, stretchable DuraFlex® webbing with sliding back D-ring. Front look is located at the waist for greater comfort in positioning. Chest strap, with adjustment pad, keeps shoulder straps from sliding off. Universal sizing. Complies with OSHA, ANSI, and CSA Standards.
The 6756RS has rebar snap hook w/attached swivel, 13 links, 2 locking snap hooks. Complies with OSHA and ANSI Standards. Sold individually. NOTE: Positioning and restraint lanyards, aka non-shock-absorbing lanyards, should be used for work positioning and restraint only. Positioning assemblies are accessories to the personal fall arrest system and should be used for work positioning only.
1" nylon web positioning assembly with two locking snap hooks and one locking rebar hook. Connects to the side D-rings of full-body harnesses and body belts for work positioning applications. Complies with OSHA and ANSI Standards. Sold individually. NOTE: Positioning and restraint lanyards, aka non-shock-absorbing lanyards, should be used for work positioning and restraint only.
Provides an anchorage connection for your fall protection system. Choose the length that best fits your needs. Tie-off straps, with pass through D-ring, are designed to wrap around a beam or similar structure. 400 lbs maximum capacity. Complies with OSHA and ANSI Standards.
