Lift even the heaviest covers with ease. Takes the strain out of lifting heavy manhole covers. One-piece lifter features an all-steel handle with cadmium plating to fight rust. Rubbers grips on hand and foot prevent slips. Steel hook locks into the pole for safe storage.
84" diameter umbrella offers low cost protection from sun and rain. It features heavy duty vinyl in safety yellow with a sturdy, 92" two-part metal pole that tilts for convenience. It can be pushed into the ground or strapped to the manhole guard rail. For easy storage, it collapses to 4" x 6" diameter.
The unique design of this panel allows each regulator to be individually adjusted at different pressure settings, allowing as well, separate outlets for air tools. The viewing window on the case allows monitoring of pressure gauges. A 16 gauge steel stand for support is included as well as all brass plumbing with quick-disconnect Hansen couplers.
The Manhole Ventilation Passthru is designed to maintain and re-direct the air flow with minimal restriction into manholes, sewers, and tanks. Made of Linear Low Density Polyethylene. Low profile elbow. Collapsible duct for easy entry, springs back into shape. Quick release draw string to drop into manhole. Recyclable,weighs 11 lbs, and comes with a storage case.
White case made of corrosion resistant ABS plastic and high visibility defibrillator graphics. Special features include 6" x 10" window and right hand door opening. Three optional slide in shelves.
This Point-of-Attachment (POA) Air Control System connects to any breathing air source. It’s housed in a Pelican carry case that can be wall-mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure is 150 psi.
These submergible pumps discharge out of the top, which allows continuous operation at low water levels and extended dry-runs with out overheating the motor. All pumps feature quick connect fittings and all are powered by 110v AC. The 1 HP Deluxe Pump moves 96 gpm, has a maximum operating depth of 39..5', and will pump out down to 2" deep. The Low Water Pump has nearly the same specifications as the Standard Pump, but will pump out water down to 3/16" deep.
The Remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel.
Attached to any air source or filter panel, the Remote CO Monitor alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm (5ppm Canada). The CO monitor can be operated in AC or DC mode and uses a single 9-volt alkaline battery. Maximum regulator inlet pressure is 150 psi. Comes with coupling pigtail.
Belt mounted for carrying respirators, gloves, goggles and small tools. Constructed of lightweight nylon reinforced vinyl fabric with Velcro® closure to protect equipment from dust and moisture. Available in half mask and full mask sizes.
