The UniRail™ system consists of a high grade, extruded aluminum rail and is best suited to modern building projects requiring internal and external facade access, inspection and maintenance, including walkways and suspended gantries. The system has also been used extensively for suspended access work by rope access technicians, as it meets the requirements of both abseil and fall protection standards.
The UCL Advanced Series Vehicle Hitch Mount Sleeve is designed to install into a 2” hitch receiver on an attendant vehicle to provide a portable anchor point for confined space entry/retrieval, rescue and fall arrest systems. Various sockets, extensions and accessories are available to allow use of the sleeve in a multitude of situations. Winch sold separately.
UCL Advanced Digital Series Winches are rated for a maximum working load of 450 lbs with an 11:1 safety factor. This winch offers 1 or 2 cranking speeds capable of retrieval/descent at average speeds from 13ft/min (4 m/min) up to 30 ft/min (9 m/min). Available in 3 standard sizes, 100, 200 and 300 Series winches holding up to 300 feet of 3/16" (5mm) diameter cable/rope. This winch also accommodates various diameters of cables up to 3/8" and ropes up to 5/8".
Cable choker (7x19) designed to be wrapped around anchors to provide a very durable anchor point for lanyards or lifelines. Great for welders or hot work areas
The 3M™ DBI-SALA® ExoFit™ X100 is designed with high-quality components that have been developed to enhance the harnesses safety and comfort while working at height on your job site. The X100 comfort harness is built with 6,000lb polyester webbing, nylon/polyester hybrid comfort padding and robust alloy steel hardware. The anti-slide back D-ring plate design helps reduce dorsal D-ring slide and enables a convenient adapter location to connect personal SRLs.
