The Remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel.

Attached to any air source or filter panel, the Remote CO Monitor alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm (5ppm Canada). The CO monitor can be operated in AC or DC mode and uses a single 9-volt alkaline battery. Maximum regulator inlet pressure is 150 psi. Comes with coupling pigtail.

This Point-of-Attachment (POA) Air Control System connects to any breathing air source. It’s housed in a Pelican carry case that can be wall-mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure is 150 psi.

Give your workers a portable filtered air source for greater mobility in the workplace. Air filtration panels are designed to provide from 1 to 5 airline respirators up to 30 or 60 cfm of breathable air ranging from 5-125 psi. Unique 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants as small as .003 microns in diameter. Should be used with case closed to avoid damage to sensitive inner parts.

The unique design of this panel allows each regulator to be individually adjusted at different pressure settings, allowing as well, separate outlets for air tools. The viewing window on the case allows monitoring of pressure gauges. A 16 gauge steel stand for support is included as well as all brass plumbing with quick-disconnect Hansen couplers.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. the system filters inlet air to provider respirator users with Grade-D quality air and monitors for CO and/or Oxygen. The first stage element filters bulk water and particulates and has an auto drain. the second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates and has an auto drain as well.

The Auto-Air™ filtration system was developed to provide automatic reserve air in the event of either electrical failure or reduced pressure from the main air source while working in IDLH or hazardous environments. In the event of a pressure or electrical failure, the Auto-Air system automatically switches to the reserve air cylinder(s). Local and optional remote alarms signal the workers that the primary air system has failed and switched to the back-up air system.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. the system filters inlet air to provider respirator users with Grade-D quality air and monitors for CO and/or Oxygen. The first stage element filters bulk water and particulates and has an auto drain. the second stage coalescing filter eliminates atomized oils, mists, ultra-fine particulates and has an auto drain as well.

Auto-Air Carts provide fully automatic reserve air for work in hazardous environments. The Auto-Air Cart provides a system approach to breathing air filtration. One unit contains a full Grade-D filtration unit and either a pneumatic or electric reserve air system. Choose a cart size based on the desired amount of reserve air to allow workers to safely egress the work area. The pneumatic versions should be selected in hazardous and potentially explosive environments.