Fire Hooks Unlimited
The ALL-AXX is an 11 pound steel handled axe with a 6 lb. pickhead on one end and a halligan fork on the other. Designed for the roof, the 6 lb. blade can make a crevice so the fork can fit in the bulkhead door. The spike can be used as a handle to pry open the crevice or it can pull the roof open after cutting it with a saw. The top of the axe is a striking plate so you can drive the fork into the crevice if necessary. The ring can be used to rope vent windows with a half hitch on the handle....
An upgrade from the halligan type in use by the new York City Fire Department since 1948. Special carbon steel designed head, aircraft steel shaft, celtex grips, and ram knob. Over 40 years of proven service to be known as the best.
A positive aid for forcible entry made of 6061-T6 aluminum. Extra help for forcible entry.
This hook was developed to find hiddenfire in deep seated smoldering fires normally found in dumps or dempsey dumpsters. The normal hook just won't pull trash in large quantaties. Our trash hook, because of it's two large six inch pointed prongs, will grasp debris in huge chunks. Available in the following sizes: 32", 40", 4', 6', 8', 10' with D-handle.
Featuring a 4 lb. sledge face and a Rex lock puller on one end and an alternating gas shutoff/pry end head on the other, the Fire Hooks Unlimited Buster Bar is excellent for use as a solo forcible entry tool. The sanded celtex along the Buster Bar’s 14” long handle gives you a positive no-slip shock absorbing grip for greater control of the tool during use. With the Fire Hooks Unlimited Buster Bar, you’ll have the tools you need to perform successful solo forcible entries in one convenient...
A new style officers hook, this one is 24" in length and has a chisel end for prying. Made with a roof hook head and celtex grips, a "baby roof hook".
Special design for power saw use by the New York City Fire Department, by the auther of "Power Saw Use", tools #9. Designed for the NYFD for fire service ventilation as its #1 priority. Carbide tips that are twice the width and body of the blade lessen binding and increase the kerf of the cut. Blades are made of exceptional quality steel and carbide tips. Tips are attached by a patented interlock laser beam method that lessens protrusion into the gullet decreasing the risk of tooth...
Designed to break up creaosote build-up after fire is put out. The 824 is a 3 section fiberglass extension polewith a unique ram head. It extends from 8-ft to 24-ft and is made to fit any straight chimney.
DRY-WALL HOOK: A hook specifically designed for dry wall removal of all types. Can be used on other materials such as wood, plaster, sheet metal walls and ceilings. An exceptional overhaul hook! Features Larger Contact Point, Conventional Penetration, an Arc Hook, Exceptional Pry Action, Combination Rake and Hoe, Handles made of Solid Fiberglass, Choice of Knob End, Stainless Steel Wear Sleeve, and Celtex Grips. Available in the following sizes: 4', 5', 6', 8', 10', 12...
We also offer our DYNAMIC-FOURSOME which features the "IRONS" - 8lbs. Force Axe, 30inch Pro-Bar, Marry Strap, and K-Tool Unit.
Equipped with 12 keys attached to a 5" jailer ring. Manufactured to conform with the majority of elevator manufacturer access keys. Keys are hard anodized in gold color plate to resist rust.
Runner Board or back Step Mount --Strong anodized aluminum with vinyl trim. Bolted to step or running board with two 2 1/4" bolts. No moving parts to break. The extinguisher nevers falls off as do old strap holders. Compartment Mount "The Hide-Away"-- Breakaway vinyl lock strop and strong hinge for ease of removing from small storage compartments.
The FARRMAXX is a Kelly like forcible entry tool with a maul head. Weight is 12 lbs and 30" long. Good for short strikes in confined spaces. Works well with Pro-Bar combination of having two tools at the door with 12 lbs. strike tool.
It will cut lathe, plaster, and sheetrock faster than any tool on the market today. On its back is ten sharpened cross cutting teeth that can cut on the pull stroke as well as the push stroke. Available in the following sizes: 4', 5', 6', 8', 10', 12', 14' ... 32", 40", 4' (with D-handle).
The lightweight state-of-the-art hydraulic forcible entry tool. FEATURES: (1) The HYDRA RAM is truly a one person operation (2) Weight: 12 lbs (3) The FIRST and ONLY on piece intergrated hydraulic forcible entry tool (4) Maximum thrust opening is 4".
30 Inch forcible entry tool - The fore runner of the halligan with the exception of the pike. Exclusive celtex self extinguishing grips. Available with or without grips.
The "PIKE POLE" used Nation-wide.- The standard of fire service. Field Tested to get the job done during basic fire operations. D handle available on models 32" and 40".
We participated in the development of this tool with the New York City Fire Department - Research and Development Division. Our all-purpose head, aircraft steel shaft, chisel end, and celtex grips makes up this unit. The chisel end is used as a prying tool for scuttle hatches and roof doors. The short lengths are good for going up fire escapes and scuttles to the roof. Accept only aircraft steel for lightweight, but strong tool. Can also be ordered in fiberglass. SPECIFY. Ring added to chisel...
An ideal separation tool. Includes "O" Tool, Kerry Key and Shove Knife.
Made by a firefighter for firefighters. Kit includes: Kerry Key and Holder, Shove Knife. Ladder Officers: This kit is an ideal assigned tool in separation from ladder companies in Hi-rise fires, search, or examination procedures. Chiefs: Carry this kit for added protection in all fire and emergency conditions. For through-the-lock method of forcible entry, the "O" Tool removes the lock cylinder and the...
The "Package" Model is equipped with the following: (1)NIGHT EYE - A bright LED light that provides illumination on a smokey roof or while cutting a roof at night. (2) CARRY SLING - A heavy duty, adjustable shoulder carry strap with reflective stripe. (3) CARBIDE TIP BLADE - Your choice of a 24-tip (12-inch) or 30-tip (14-inch) wood cutting carbide tip blade. (4) FLASHING LIGHT - A red LED flasher mounted to the top of the saw to help locate on a smokey roof.
The Pro Set consists of the Pro-Bar 30, which is married to the 8 lbs Sledge Hammer with Adz bracket, clips along with our Shoulder Strap System (#SSSYS). The Sledge has a 28 inch fiberglass handle with Celtex grips. This pair is a forcible entry MUST for any truck or rescue company.
Our portable pump tank makes other models obsolete. While other canvas tanks are single walled and burst easily, this is the only double walled pump tank on the market. A tough and replaceable inner bladder gives extra strength, making the unit durable, cost effective and easy to repair. This is the only pump on the market with "Lubeport" a new design which allows you to lubricate the unit without having to take it apart.
Breaks the strongest padlock when placed in the shackle and struck with a maul or the back of an axe. Especially useful in roll-up doors on taxpayers and/or commecial buildings found in shopping malls. The 18" handle keeps hands safely away from strike zone. Handlis is rubberized with celtex grip for shock absorption.
The ultimate tool for forcible entry, perfectly balanced to lay correctly in the hands for that short strike stroke on an iron or unlimited padlock breaker. Large, oversized head makes the strike zone moer accurate and easy to hit. Cutting edge annealed to keep its edge longer. New Type Handle: Super strong handle with rigid fiberglass core surrounded by durable shock absorbing foam. A combination that eliminates the need for hand grips and prevents splintering and breaking on overstrike....
PUMP VOLTS: 115v. AMPERES: 6-amps. HORSE POWER: 0.5. DISCHARGE SIZE: 2-inch. MAXIMUM HEAD (LIFT): 36-feet. MAXIMUM G.P.M.: 50-gpm. ELECTRICAL CABLE: 33-feet. WEIGHT: 26 lbs. WIDTH: 7.1-inches. This pump self primes over 4 inches of water. Water that is less than 4 inches has to be primed. Simply pour water into the top of the unit and it will pump down to one twelfth of an inch. 1/12th of an inch - which makes it almost zero.
Our new Husky Blade is extremely versitile, and can be used on any power saw - gas, electric, battery operated, and will cut virtually anything on site! This exceptional diamond blade has been specially designed for Urban Search & Rescye teams because it will cut any material. It has been specifically crafted to reduce heat during the cutting process. Some features of this blade: (1) Blade for Blade, the ratio is 100:1 of a normal steel (aluminum oxide) or concrete (silicon carbide) blade...
A tool designed (by a FDNY Fire Lieutenant & licensed locksmith) to pull all types of lock cylinders (rim or mortise) from the various glass type or solid doors.
Features the same lock-pulling devices as the Rex-Tool but without the pry-bar. Carry it in your locket or wear on your belt with our large 3 inch leather loop. Carry it over the shoulder or wear it around your waist with the belt supplied. Apply when in operational procedure to pull or pry a lock cylinder with the pick of the pro-bar. Comes with leather sheath, reflective shoulder strap and all operational key.
Nowhere else in the United States will you find a forcible entry tool quite like the PRO-BAR. Developed by the forcible entry instructor of the NYFD this Halligan-type forcibel entry tool is the result of years of research and countless interviews with the fire chiefs and fire fighters in the NYFD and many other large and small departments located in the eastern section of the U.S. The Pro-Bar is: 30" long. A halligan-type forcible entry tool. Is droped forged, one piece construction, of...
Has a female quick connect fitting on the tank and a male fitting on the hose. This allows removal of the pump to increase storage space of the tanks. No longer will the hose be in the way with its loop attachment. You can now store your pump and hose elsewhere on the rig. When using, simply connect the male to female with its quick connect application and your in operation.
A new and innovative hook. Another first from Fire Hooks Unlimited for use in the Fire Service. Made of special lightweight steel or fiberglass shaft covered with 28 inches of our exclusive fire retardant no slip celtex grip. On one end is our popular New York Roof Head, on the other is our newly designed Talon Fork. Excellent for overhaul. May be ordered in sizes 2ft to 8ft at the same price. The most popular size is 5 ft.
This hook does it all. It can penetrate or pull all types of materials used in the building trades. It features two sharpened blades, one on the top for penetration during thrust and one underneath for slicing on the pull stroke. An arc hook on the back of the top blade is used in place of limited space. A chisel tooth of 1-1/2" right angle blade - tooth is sharpened to penetrate loose materials on the chop stroke. Available in the following sizes: 4', 5', 6', 8', 10...