Allegro®

AC Model: Weighing 13% less than our 9513. This blower features a venturi inlet to increase CFM . Designed with tough steel construction, rubber feet, handle and a durable grill. Complete with AC electric motor. Blower sold separately or with quick-connect 15' or 25' ducting canister. DC Model: The COM-PAX-IAL blower can run off a truck battery when you're on the road. 12 volt DC electric motor with single speed performance. Lightweight and easy to store. Features a 15'...

Allows safe connection of additional ducting for remote locations, this connector is constructed of galvanized steel with a raised lip to hold ducting in place.

This unit can be used for both delivering fresh air or extracting contaminated air. Tough steel construction with handle and weighing only 27 lbs. makes this blower easy to transport. Add 12" standard ducting for greater flexibility. High RPM motor.

This lightweight, corosion, UV and chemical resistant polyethylene housing offers a superior design with durable construction.The carry handle is molded into the blower. This compact and super quiet unit features a polypropylene, nine blade fan, a steel/powder coated grill and comes with a 5ft. electrical cord or 15 ft. cord with Alligator clips. The bottom enclosure ensures safe and convenient storage of electrical components. Designed to work seperately with canister and ducting. The quick-...

This 8" axial blower is an all-in-one ventilation system. The design allows ducting to collapse into a built-in canister for easy storage. Includes blower, built-in storage canister and 15 feet or 25 feet of ducting. Free air output: 1275 cfm.

AC Model:This lightweight and compact Com-pax-ial blower can be an all-in-one ventilation system sold with quick-connect 15' or 25' ducting canister which attaches quickly without tools with Cam-lock latches. DC Model: All the same features of the AC model with CFM rate of 796 Free air. Blower with quick-connect 15' or 25' ducting canister. This attaches quickly without tools with Cam-lock latches. Both Blower and Canister come with handles.

Our patented Air Cooling Vest may be connected to any clean compressed air source and worn under protective clothing. It weighs only 1½ lbs. It is durable and breathable. One size fits 130-225 lbs. Air Consumption: 5-15 cfm at 100 psi. Airline hose available in 50' and 100' lengths.

Cost effective ambient air pumps protect workers in supplied air environments. Special design supplies clean, breathable air to NIOSH approved respirators. Pumps are portable and oil-less for convenience. Produce no carbon monoxide, oil vapor, or oil mist, thus eliminating the need for carbon monoxide monitoring and alarm systems. Easy to maintain - only 1 moving part. Rotary vane pumps use 4 carbon vanes that last for 5,000 to 15,000 hours of continuous running. Ideal for painting/refinishing...

The Bitrex™ Fit Test Kit offers qualitative OSHA-compliant fit testing for disposable and reusable dust and mist respirators. Bitrex creates an unmistakable bitter taste that indicates break through in the respirator fit. Bitrex has been found safer than saccharin tests while producing identical results. Disposable glass ampules make pouring solution into nebulizers easier and reduces the chance of contamination.

Give your workers a portable filtered air source for greater mobility in the workplace. Air filtration panels are designed to provide from 1 to 5 airline respirators up to 30 or 60 cfm of breathable air ranging from 5-125 psi. Unique 3-stage filtration system purifies compressed air removing water, oil and particulate contaminants as small as .003 microns in diameter. Should be used with case closed to avoid damage to sensitive inner parts. Whenever the concentration of carbon monoxide exceeds...

Used to test the accuracy of the CO Monitor on Allegro’s CarryAir, Wall-Air or Oil-Less Compressor. Kit includes a 17 liter cylinder each of oxygen and CO, a constant flow pressure regulator with gauge and tubing in a plastic carrying case

Iso Amyl Acetate (banana oil) offers the oldest method of testing respirator fit. Its strong, readily identifiable odor will be recognized if respirators don’t obtain a fit. The kit includes all the equipment necessary to perform a proper fit test, including a fit test tent, jars, 8 oz. testing agent, paper towels, disposable bags and other necessary components, all housed in a convenient storage and carry case.

Easy to use and very durable, the Deluxe Work Tent features quick set-up from the inside or outside with fiberglass rod frame. These frames are uniquely designed to not pull out or poke through the fabric. A handy attached roll-up flap provides compact storage, easy transport, and means no missing storage bag. Offered in three sizes, it is available in a one door design with zipper closure, or a two door design with one zipper and one roll-up door. The pitch roof style provides extra headroom,...

An economy version of the Standard Blower, this lightweight blower comes in at only 34 lbs. It has a tough metal base and durable ABS housing and works great with generators. Free air output: 1277 cfm.

Utility shelter springs from backpack into full size (6'1" x 6'w x 7'h) tent in seconds. Made from water-resistant, flame-retardant nylon with 360deg. reflective striping. Quick set-up from the inside or outside, with two floor-to-floor fiber poles for better stability and structural strength. One large door and two large windows offer easy access for worker and equipment, and open bottom allows for protection whil working over manhole covers or excavation sites. Comes in...

Allegro’s flow meters are separate from the pump to allow the user to set the flow for more than one pump with the same meter. Features an expanded scale and includes necessary adapters for use with particulate cassettes.

Conveniently combines all the most frequently requested elements into one easy-to-order supplied air system. Complete System includes ambient air pump, continuous flow full face piece or half mask supplied air respirator with breathing tube, 50ft. hose, and all required fittings. Pumps are portable, oil-less, and produce no carbon monoxide, oil vapor, or oil mist. Fully assembled with all filters, fittings and couplers. Continuous flow full face piece respirator is soft, pliable and lightweight...

Perfect for remote location where electricity is unavailable, this gasoline-powered, 3 ½ hp blower offers high flow rates. The 8" ports and steel guards provide safety and the ABS housing with built-in handle offers durability and convenience. It is designed with unique spring-loaded feet that minimize blower walking and offer greater stability. 2 quarts of gasoline will power 2-3 hours of running time. Blower includes 10 foot metal exhaust hose. Weighs only 44 lbs. Free air output: 2000-...

These cases are all made of corrosion resistant ABS with ultraviolet inhibitors. The rubber door seal protects against dust and moisture and the non-metallic hinges and latches prevent rust. You can customize these wall cases with the label kit. Small Yellow Case with Label Kit and 1 shelf: Exterior: 14"w x 9 1/2"d x 18"h, Interior: 12"w x 7 1/2"d x 16"h, Weight: 3 lbs. All Medium Cases with Label Kit and 1 shelf: Exterior: 14"w x 9 1/2"d x 21"h,...

Electric, explosion-proof motor is UL/CSA listed. Single-phase motor includes Hazardous Location NEMA rated 115V plug for use with explosion-proof socket (included). ABS housing provides non-sparking safety. Meets Class I, Divisions I and II, Group D and Class II, Divisions I and II, Groups F and G Hazardous Location Requirements. Warning: Explosion-Proof Blowers must be used with statically conductive ducting.

The M2 is a patent-pending two-sided sampling cassette for easier and more efficient use in the field and in the laboratory. This is the first cassette to provide sampling options to field personnel. Each cassette can be used to collect two different samples, two identical samples concurrently, or one sample while using the other side as a control. The M2 Cassette is also the very first of its kind for laboratory personnel. It provides one-time preparation for two samples, pre-printed traverse...

Lift even the heaviest covers with ease. Takes the strain out of lifting heavy manhole covers. One-piece lifter features an all-steel handle with cadmium plating to fight rust. Rubbers grips on hand and foot prevent slips. Steel hook locks into the pole for safe storage.

84" diameter umbrella offers low cost protection from sun and rain. It features heavy duty vinyl in safety yellow with a sturdy, 92" two-part metal pole that tilts for convenience. It can be pushed into the ground or strapped to the manhole guard rail. For easy storage, it collapses to 4" x 6" diameter.

The Manhole Ventilation Passthru is designed to maintain and re-direct the air flow with minimal restriction into manholes, sewers, and tanks. Made of Linear Low Density Polyethylene. Low profile elbow. Collapsible duct for easy entry, springs back into shape. Quick release draw string to drop into manhole. Recyclable,weighs 11 lbs, and comes with a storage case.

This Point-of-Attachment (POA) Air Control System connects to any breathing air source. It’s housed in a Pelican carry case that can be wall-mounted and includes an adjustable pressure regulator, pressure gauge and a pressure relief valve. This POA system meets NIOSH requirements for point of attachment. Maximum regulator inlet pressure is 150 psi.

The Remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light. The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel.

Belt mounted for carrying respirators, gloves, goggles and small tools. Constructed of lightweight nylon reinforced vinyl fabric with Velcro® closure to protect equipment from dust and moisture. Available in half mask and full mask sizes.

Ensures a quick, safe, easy method for wiping respirators between full cleaning periods. Large (5" x 8"), individually foil-packaged towelettes contain 70% Isopropanol and are designed specifically for use on rubber respirator facepieces and other personal safety equipment. Alcohol Free pads are for use on respirator facepieces where the manufacturer recommends using a non-alcohol cleaning wipe. Active ingredient: Benzalkonium Chloride. Will not harm even the most sensitive rubber...

Creates a concentrated area for qualitative fit testing. The tent features two openings for convenient respirator adjustment. A saturated towelette can be clipped and hung inside the tent when using it for an Iso Amyl Acetate test. Made of nylon reinforced material with a viewing window. 48" high and 24" diameter. Warning: Do not use tent with Irritant Smoke Test.

When the sweet taste of saccharin is detected, the respirator has failed its fit test. The Saccharin Fit Test Kit offers OSHA-compliant testing of disposable and reusable dust and mist respirators. It includes polycoated hood, two nebulizers, sensitivity and fit test solutions, and instructions. Replacement solutions are in ampules.

Lead-This 37mm, MCE cassette is .8µm mixed cellulose ester and is specifically designed for lead sampling. TEM-This 25mm, .45µm + -5.0µm cassette is designed for asbestos final clearance testing. The cassettes incorporate a 2" static conductive extension cowl and meets all applicable standards. PCM-A 25mm cassette with .8µm pore size for asbestos sampling. The high quality cassette incorporates a 2" cowl and meets stringent quality standards.

The Deluxe SCBA Cover Kit protects SCBA’s from dirt and UV light. Velcro closure offers quick access. Includes heavy vinyl cover, silk screened identification, masonite backboard and deluxe tough, yellow steel cylinder bracket.

Where air quality is especially low, this free-standing or wall-mounted particulate assembly helps extend the life of the filter panel’s disposable filters by removing liquids and contaminates down to 5 microns. It is equipped with an adjustable regulator pressure gauge and meets the NIOSH requirement for point-of-attachment.

Provides comfortable protection against overspray and other particulates. Spray Sock fits over the head and can be worn with goggles, half mask or full mask respirators

Our Standard Cooling Vest is lightweight and when soaked in water for 5 to 9 minutes, provides all day cooling comfort. Snap closures allow for quick access. Available in royal blue in 3 sizes, 100% cotton and hand washable.

Ideal for under HazMat suits and other protective clothing. This vest features four pockets for inserts, zipper front and adjusts with Velcro over choulder and side straps to help achieve a snug fit. Added comfort with 2 layers of 100% cotton. Royal Blue.

The Venturi Blowers from Allegro are a perfect solution to moving air in refineries, utility and power plants, shipyards, paper and pulp plants, the marine and steel industry and manhole operations. Anywhere where fumes that may be poisonous, explosive or hazardous from process towers, tanks, large pipes or confined space need to be removed. You can cool workers in elevated temperature conditions, or cool heavy equipment that may be in danger of overheating or that needs to be cooled in order...

Easy to use 6" x 7 ½" wipes for respirator and other personal safety equipment clean-up. These Benzalkonium Chloride and alcohol wipes reduce the hazard of contamination. 220 wipes per canister. The impact resistant ABS holder mounts on the wall to store wipe canisters for quick and easy access.