An Original CMC Rescue Design, and Still a Favorite! The Pro Pocket is designed to carry your accessory equipment — runners, prusiks, trauma shears, gloves, etc. — securely attached to your harness instead of in a Stuff Bag hanging from your rescue harness or in pants pockets, where the contents sink below the harness’s leg straps, which can be difficult to access.

Attaches to a #2 or #3 Rope Bag. The only pack that carries a rescue system ready to deploy, the System-Pac stores the hardware already set up for the system and attached to your Anchor Plate. A unique CMC design feature is a back pocket that not only holds an Ultra-Pro 4 Edge Protector, but also uses the edge protector as a stiffener, making the pack easier to carry when loaded.

Made of tough 1,000-denier CORDURA® nylon with padded sides, the Truck Cache holds all the rigging hardware needed to set up a main line and a belay in a fold-open case that fits efficiently in a truck compartment. Our redesign includes improvements for organizing either MPD™ or traditional rescue systems. The Cache looks like a briefcase but has hide-away shoulder straps so it can be carried as a backpack.

The patented locking mechanism in our CSR Pulley is easy to release under load, creating much greater efficiency with the lowering and raising necessary to a confined space rescue. The machined aluminum swivels at both ends of the system eliminate any potential twisting of the lines. This system is also an excellent choice for confined space entry or rope access work where a heavy-duty pulley system is desired. Pulleys are UL Classified to NFPA 1983 – General Use. System includes: 1/2?

This kit has the minimum equipment for the entrant, attendant, stand-by rescuer, main-line operator and belayer to set up systems for vertical entry into a confined space for both rescue and patient transport. For a complete confined space solution, add or use your own communication, gas monitor, and ventilation equipment. PRODUCTS INCLUDED

The molded interior of the ResQmax Complete Kit Pelican Case will also hold one additional projectile of any type, one filler hose assembly adapter, a ResQmax Tool Kit and up to 3 additional Pack-of-5 consumables. Additional ResQmax™ products are available by special order.

The molded interior of the ResQmax Complete Kit Pelican Case will also hold one additional projectile of any type, one filler hose assembly adapter, a ResQmax Tool Kit and up to 3 additional Pack-of-5 consumables. Additional ResQmax™ products are available by special order.

The Sling Projectile inflates on contact with the water to become a flotation collar for the subject or, at minimum, an easy-to-hold floating ring. The 300-foot (91-m) 8-mm Polyspectra line floats and has a tensile strength of 9.8 kN (2,200 lbf). The average launch distance with the sling projectile is 200 feet (61 m). Products included: ResQmax Launcher with Folding Stock, Streamline Sling Projectile with 2 spare molded sling burst capsules, 300 ft.

Designed to meet the NFPA 1983 specification for a floating water rescue throwline, our NFPA Throwline, made with a Dyneema® core and polypropylene sheath, handles extremely well. The bright yellow color is highly visible. Rope is sold by the foot. Please contact customer support for maximum length available.

Clear tubing protects labels on the end of ropes. Slide over the label and use a safe heat source to shrink the tubing securely to the rope. Sold by the foot.

The Most Advanced General-Use Rescue Carabiner on the Market. Patented. Rescuers working in the most demanding circumstances will appreciate our ProSeries Aluminum Carabiners, the first aluminum carabiners to meet NFPA strength requirements for general use. Combining high performance with minimum weight, these carabiners significantly reduce the weight of a rescuer’s gear while maintaining the highest possible margin of safety.

Ideal for mountain rescue, swiftwater, ski patrol, tower work or other technical uses, where equipment weight is a significant consideration, these lightweight, full-strength Prusik-minding pulleys feature extremely low-profile stainless steel hardware to reduce snagging on rocks, roots, and uneven surfaces.

A Classic CMC Innovation. A CMC original design that has withstood the test of time, our Anchor Plates keep the carabiners holding the different parts of your rescue system from jamming together. The hardware becomes easier to see, making safety checks more accurate. It can also keep you from clipping a carabiner into the wrong loop of the anchor web. For anchor systems, it makes an excellent collection point.

Our anodized aluminum swivels are available in two sizes to allow users to select the strength, weight and dimensions best suited to their specific needs. Whether used in a rescue haul system, helicopter operations, or rope access, the addition of a swivel can help prevent system lines from wrapping around each other, while at the same time reducing spin caused by loading a free-hanging rope.

Machined from 1/2-inch (12.5-mm) plate, our classic Rescue 8 design has been refined for even better performance with today’s selection of rescue rope. Descenders no longer routinely use 5/8-in (16-mm) rope, so the smaller dimensions of our Rescue 8 provide greater control. The proprietary finish on the aluminum model provides outstanding wear resistance, while the nickel-chrome-plated steel model excels in high-wear situations, such as sandy, gritty environments.

Machined out of 3/8-inch (9.5-mm) aluminum stock, this compact figure 8 descender works well with escape lines or other small diameter ropes where minimum size and weight are the primary requirements. The rounded edges reduce sharp bends. The large carabiner hole accepts a wide variety of carabiners and helps prevent binding. The Survivor 8 features a hard anodized finish in a dark gray for users who require a non-reflective surface.

Passes the BCCTR Rescue Belay Competence Drop Test Criteria*. Developed specfically to meet the needs of rescue sytem belays. The well-engineered Traverse 540° is a patented, self-locking, easy-to-rig device that meets demanding drop-test criteria: able to hold falling loads quickly while limiting the peak force. The symmetrical design reduces the risk of improper rigging. A built-in release lever discharges the tension on the belay rope, eliminating the need for a release hitch.

Passes the BCCTR Rescue Belay Competence Drop Test Criteria*. Developed specfically to meet the needs of rescue sytem belays. The well-engineered Traverse 540° is a patented, self-locking, easy-to-rig device that meets demanding drop-test criteria: able to hold falling loads quickly while limiting the peak force. The symmetrical design reduces the risk of improper rigging. A built-in release lever discharges the tension on the belay rope, eliminating the need for a release hitch.

Passes the BCCTR Rescue Belay Competence Drop Test Criteria*. Developed specfically to meet the needs of rescue sytem belays. The well-engineered Traverse 540° is a patented, self-locking, easy-to-rig device that meets demanding drop-test criteria: able to hold falling loads quickly while limiting the peak force. The symmetrical design reduces the risk of improper rigging. A built-in release lever discharges the tension on the belay rope, eliminating the need for a release hitch.

Greater Leverage and Easy Transport. With a large, lightweight all-terrain wheel, a fast, simple securing system, and eight adjustable handle positions, the Mule II Litter Wheel is an excellent all-purpose transport solution. The universal design is compatible with any type and style of rigid litter. Its single wheel design makes it ideal for narrow trails, allowing agility, versatility and ease of movement even in the roughest terrain.

New, Larger Carabiner Hole CEN 567

The curved interface between cam and shell reduces rope damage during a shock load Shell and cam are machined aluminum and anodized black. For use with 7/16 or 1/2 inch rope only. Rated MBS: 6,000 lbs. (26kN) Weight: 8.8 oz. Individually Tested
.

Made from Extra Long-Life CORDURA® Nylon for Bags that Last, and Last. Solid performers for years, our popular Rope Bags feature a variety of innovative elements. Contoured backpack-style shoulder straps offer greater comfort when carrying a heavy bag. Bag tops are made of rugged pack cloth for easier closing. Handles, just inside the top, can be used to hold the bag open for quicker stuffing or to carry the bag from the top, haul-bag style.