Valves
Supply one LDH line with two
smaller lines; one clapper
design. L. 101/2" • W. 10" • Ht. 5" • Wt. 10 lb.
Feed three small diameter lines
with a large diameter line. Relief
valve standard. L. 121/4" • W. 16" • Ht. 11" • Wt. 211/2 lb.
Supply one LDH line with three
smaller lines; each individually
clappered. L. 141/2" • W. 15" • Ht. 9" • Wt. 17 lb
This light-weight, compact unit is a
simple, economical way to feed
two small lines with one large line,
and continue with a large line.
All outlets are valved. Relief valve
and pressure gauge are standard
This is a high quality gate
applications requiring a built-
without relief. This gate valve
includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 22 lb.
This is a high quality gate valve for
applications requiring a built-in elbow with relief valve. Extension 12" • W. 8" • Ht. 15" • Wt. 25 lb.
This is a high quality gate valve for
applications requiring a built-in relief
valve without an elbow. Extension 12" • W. 8" • Ht. 15" • Wt. 25 lb
Supply one LDH line with two LDH lines; each individually clappered. L. 171/2" • W. 151/2" • Ht. 91/2" • Wt. 30 lb.
Lightweight Alloy, used as suction colllector for pumpers, self-locking handle, 2-1/2" swivel inlets come with strainers. Three 2-1/2" female inlets x one 2-1/2" -6" female or male outlet.
Self-Locking handle, 2-1/2" to 6" female inlet x three 2-1/2" male outlets.
Lightweight Alloy, Two 2-1/2" female inlets x 2-1/2" outlet. Optional drain valve. Weight: 6.4 lbs.
Male adpaters are easily removed for adjustment of seats. 1" female inlet x two 1" male outlets.
Self-Locking handle for positive postioning 2-1/2" female inlet x two 1-1/2" male outlets.
Lightweight Alloy, used as suction inlet collector for pumpers, self-locking handle, 2-1/2" swivel inlets come with strainers, two 2-1/2" female inlets x one 2-1/2" - 6" female or male outlet.
Lightweight Alloy, self-locking handle, used for laying, extending or adding 1-1/2" or 2-1/2" lines without interfering with operation of other lines. 2-1/2" female inlet x one 2-1/2" and two 1-1/2" male outlets.
Supply one LDH line with two
smaller lines; one clapper
. Call for pricing.
design. L. 101/2" • W. 10" • Ht. 5" • Wt. 10 lb.
Standard spring loaded relief valve.
Adjustable from 50 psi to 250 psi. Call for pricing.
Feed three small diameter lines
with a large diameter line. Relief
valve standard. L. 121/4" • W. 16" • Ht. 11" • Wt. 211/2 lb. Call for pricing.
This light-weight, compact unit is a
simple, economical way to feed
two small lines with one large line,
and continue with a large line.
All outlets are valved. Relief valve
and pressure gauge are standard. Call for pricing.
Supply one LDH line with three
smaller lines; each individually
clappered. L. 141/2" • W. 15" • Ht. 9" • Wt. 17 lb. Call for pricing.
A low-profile valve that incorporates all desirable benefits. Only nine turns to open or close, indicator to show position of the ball, relief valve and air bleed-off. Pressure drop is reduced to a minimum by the 30° angle inlet. Only 81/2" clearance required from the center of the truck connection to the bottom of the ball valve. Available with any thread or Storz Combination. Extension 12" • W. 8" • Ht. 16" • Wt. 34 lb. Call for pricing.
This is a high quality gate
applications requiring a built-
without relief. This gate valve
includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 22 lb. Call for pricing.
This is a high quality gate valve for
applications requiring a built-in elbow with relief valve. This gate valve also includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 25 lb. Call for pricing.
Supply one LDH line with two LDH lines; each individually clappered. L. 171/2" • W. 151/2" • Ht. 91/2" • Wt. 30 lb. Call for pricing.
This is a high quality LDH gate valve
for industrial hydrant or pumper use. Light-weight and compact, it
incorporates an air bleeder into
the non-rising stem design. Extension 111/2" • W. 10" • Ht. 161/2" • Wt. 37 lb. Call for pricing.
Stainless Steel Piston & Cylinder. This truck inlet valve incorporates
quick-connection, fast but controlled
opening, with air bleeder and relief
valve. 45° inlet provides smooth
waterflow for reduced friction loss.
This valve is covered by a 10 year
warranty against failure due
to corrosion. Call for pricing.
This is a high quality gate valve for
hydrant or pumper use. Light-weight and compact, it incorporates an air bleeder into the non-rising stem design. Extension 10" • W. 8" • Ht. 15" • Wt. 22 lb. Call for pricing.
Feed two large diameter lines with a single large diameter line. Relief valve standard. L. 161/2" • W. 243/4" • Ht. 12" • Wt. 50 lb. Call for pricing.