Sort by

Search

  • Four Worker Airline Filter

    Made for rugged environments, this "Pot" type filter utilizes a large capacity quality filter cartridge to provide longer life filtration. Greater material surface area designed to remove oil, mist, water vapor and particulates down to 0.5 micron. Made of impact and corrosion-resistant steel and equipped with an airline regulator and two outlets. Can be either wall or floor mounted.

  • Deluxe Pump Smoke Test Kit

    The Deluxe Pump Smoke Test Kit includes a smoke fit tube pump with batteries which generates the required 200 ml per minute of smoke, six smoke tubes with caps, and instructions

  • Full & Half Mask Supplied Air Systems

    Conveniently combines all the most frequently requested elements into one easy-to-order supplied air system. Complete System includes ambient air pump, continuous flow full face piece or half mask supplied air respirator with breathing tube, 50ft. hose, and all required fittings. Pumps are portable, oil-less, and produce no carbon monoxide, oil vapor, or oil mist.

  • Gas Blower / Honda

    Offering portability and the same output and weight as the 9505, plus the durability of a Honda engine. Polyethylene housing with buil-in handle offers convenience in transport. The sturdy metal base offers great stability. Blower includes 10 foot metal exhaust hose extension.

  • AC & DC Com-pax-ial Blower

    AC Model: Weighing 13% less than our 9513. This blower features a venturi inlet to increase CFM . Designed with tough steel construction, rubber feet, handle and a durable grill. Complete with AC electric motor. Blower sold separately or with quick-connect 15' or 25' ducting canister. DC Model: The COM-PAX-IAL blower can run off a truck battery when you're on the road.

  • Respirator Fit Test Tent

    Creates a concentrated area for qualitative fit testing. The tent features two openings for convenient respirator adjustment. A saturated towelette can be clipped and hung inside the tent when using it for an Iso Amyl Acetate test. Made of nylon reinforced material with a viewing window. 48" high and 24" diameter. Warning: Do not use tent with Irritant Smoke Test.

  • Constant Flow Hood Systems

    Constant Flow Full Respirator Hood Systems are designed for easy handling and use. Complete with ambient air pump, supplied air respirator hood, breathing tube, belt 50ft. air hose, and all necessary fittings. Pumps are portable and oil-less, produce no carbon monoxide, oil vapor, or oil mist, and eliminate the need for carbon monoxide monitoring and alarm systems.

  • AC & DC Axial Blowers

    AC Axial Blower With the highest output available from an 8" axial blower, this compact unit offers light weight and high output from an AC electric motor. It is designed with tough steel construction, a durable grill, convenient carrying handle and rubber feet. Its small profile means easy storage. Certified to CSA STD C22.2 No 113. Air delivery certified CEESI.

  • AC & DC Com-PAX-ial Blower With Canister

    AC Model:This lightweight and compact Com-pax-ial blower can be an all-in-one ventilation system sold with quick-connect 15' or 25' ducting canister which attaches quickly without tools with Cam-lock latches. DC Model: All the same features of the AC model with CFM rate of 796 Free air. Blower with quick-connect 15' or 25' ducting canister.

  • Air Cooling Vest

    Our patented Air Cooling Vest may be connected to any clean compressed air source and worn under protective clothing. It weighs only 1½ lbs. It is durable and breathable. One size fits 130-225 lbs. Air Consumption: 5-15 cfm at 100 psi. Airline hose available in 50' and 100' lengths.

  • Fire Extinguisher Wall Case

    Designed to protect fire extinguishers from dust and harsh workplace environments. Made of high impact, corrosion resistant ABS. High visibility red case make locating easy. Holds all major extinguishers up to 30 lbs.

  • Source Pre-Filter

    Where air quality is especially low, this free-standing or wall-mounted particulate assembly helps extend the life of the filter panel’s disposable filters by removing liquids and contaminates down to 5 microns. It is equipped with an adjustable regulator pressure gauge and meets the NIOSH requirement for point-of-attachment.

  • AC & DC Axial Blower & Canister

    This 8" axial blower is an all-in-one ventilation system. The design allows ducting to collapse into a built-in canister for easy storage. Includes blower, built-in storage canister and 15 feet or 25 feet of ducting. Free air output: 1275 cfm.

  • 8 Inch Plastic Explosion Proof COM-PAX-IAL Blower With Ducting

    Electric, explosion-proof motor is UL/CSA listed. Single-phase motor includes NEMA rated 115v plug for use with the explosion-proof socket (included). Meets Class I, Divisions I and II, Groups C and D and Class II, Divisions I and II, Groups E,F and G Hazardous Location Requirements. EXPLOSION PROOF MODELS

  • SCBA Cover Kits

    The Deluxe SCBA Cover Kit protects SCBA’s from dirt and UV light. Velcro closure offers quick access. Includes heavy vinyl cover, silk screened identification, masonite backboard and deluxe tough, yellow steel cylinder bracket.

  • Manhole Sign

    Meeting OSHA's confined space warning requirements by reminding workers to follow proper confined space procedures, these high impact polycarbonate signs fit under the manhole cover. The clear material offers a view into the manhole, and ventilation holes allow air out and water to drain in. Also allows use of instrument probes without removal. Available in two sizes.

  • Two Speed Blower

    This blower offers greater flexibility by allowing workers to use high speed in some applications such as purging an area, and the lower speed in other sites such as very dusty environments. The 8" ports allow for positive or negative ventilation and the steel box mounted electric motor and tough polyethylene housing are designed for durability.

  • Duct to Duct Connector

    Allows safe connection of additional ducting for remote locations, this connector is constructed of galvanized steel with a raised lip to hold ducting in place.

  • Plastic Defibrillator Wall Case

    White case made of corrosion resistant ABS plastic and high visibility defibrillator graphics. Special features include 6" x 10" window and right hand door opening. Three optional slide in shelves.

  • Manhole Guard Rails

    Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 27" square x 4" for easy storage. Weighing 34 lbs., the strong, one inch tubular .078 gauge steel construction is powder-coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly.

Pages