Liners

Configured for a team of five Rescuers: four Entrants, one Attendant, for 100-foot entry. Additional Cable can increase entry distance up to 1,500 feet. Rescue Kit 1 can be expanded for up to 14 people using available options and accessories. Weight 52 lbs. (23.6kg). Made in Canada

Configured for a team of three Rescuers: two Entrants and one Attendant for 100-foot entry. Additional Cable can increase entry distance up to 1,500 feet. Weight 23 lbs. (10.5kg). Made in Canada.

Configured for a team of three Rescuers: two Entrants and one Attendant for 100-foot entry. Additional Cable can increase entry distance up to 1,500 feet. Weight 23 lbs. (10.5kg). Made in Canada.

The Confined Space Rescue Kit 5 is configured for a team of six rescuers consisting of two primary rescuers, two standby rescuers and a Hole watch and Team leader, for entries of 100' (maximum distance 1500'). The System can be configured for up to fourteen people using available modules and accessories. Weight 50 lbs. (10.5kg). Made in Canada..

The Confined Space Rescue Kit 5 is configured for a team of six rescuers consisting of two primary rescuers, two standby rescuers and a Hole watch and Team leader, for entries of 100' (maximum distance 1500'). The System can be configured for up to fourteen people using available modules and accessories. Weight 50 lbs. (10.5kg). Made in Canada..

The Victim Locator Kit is lightweight, portable, battery powered and can be operated by a single Rescuer. Multiple Kits can be deployed simultaneously on the same site without interfering with each other. It is a completely stand alone system that gives a single Rescuer the ability to search a collapse. On location of a victim, two-way voice communication is established immediately.
Weight 17 lbs. (7.7kg). Made in Canada.

This excellent stainless steel edge guard will give you the needed abrasion protection when entering over sharp edges. will fit entries as small as 18". Works great with stretchers and people over manholes, ladder rungs, railings, pipes or any surface in which the lifeline may become damaged. weight 5 lbs. Made in USA

Store and dispense chemicals safely while keeping work areas clean and free of clutter. Drum cradles are constructed of 100% polyethylene. When used in combination with Eagle's spill containment platforms, this stacking system meets EPA Secondary Containment Storage requirements (40CFR 264.175). IBC Spill Unit includes a 100% polyethylene containment tub and heavy-duty metal platform for a 400 gallon secondary spill capacity and accepts IBC units from 38" to 50" in width.

Ensures safe storage of flammable and non-flammable acids. Durable cabinets are constructed of double-walled 18-gauge steel. Designed with 1 ½" air space between walls, and upper and lower vents with fire baffles for ventilation. Also features 3-point key lock, 2" raised leak-proof door sill, baked-on high gloss blue epoxy powder finish, and highly visible warning labels. High density polyethylene shelf trays won't rust or corrode and contain up to 1 gallon of spill.

5 gallon Metal butt can.

Ideal safety storage for companies that use pesticides and specialize in lawn care, golf course management, and agriculture. Green cabinets feature double-walled steel constructions, vents with fire baffle, cap, high density polyethylene trays, and large pesticide warning labels. Models FM approved. Sold individually.

Contains splashes and spills. Wide 18" diameter helps limit splashes and spills to protect workers and eliminate waste. Funnel fits 55 and 30 gallon drums. Spout fits in any 2" NPT bung opening. Accommodates drum fill gauge. Funnel with brass screen is ideal for straining. Funnel cover (sold separately) keeps out contaminants. The drip pan catches up to 1 gallon of oils, coolants, water or other non-aggressive liquids. Measures 10.5” x 10.5” x 3” . Sold individually.

Add protection to your facility or traffic area and prevent costly structural damage. Bollard Posts feature a durable baked on powder coat in safety yellow to provide high visibility. Each post is made of 1/4" thick steel mounted on 3/8" steel plated that are pre-drilled (3/4") for easy installation. The black HDPE post caps are included and can be removed to fill posts with concrete for extra protection.

No need to paint and scrape, these Bumper Post Sleeves make old bollard posts look like new! High-visibility yellow, high-density polyethylene construction with UV inhibitors resist fading, rusting or cracking. Eliminates annual maintenance while helping to protect vehicles and the post from impact damage. Unique vertical ribs provide extra impact protection while allowing for easy slide-on installation.

Column protectors are an affordable way to protect factory columns and beams and the machinery that may bump into them. Constructed of blow-molded 100% high-density polyethylene. Protectors fit 6", 8" , 10" and 12" round or square supports. Two halves attach and fit around column with easy-to-install straps. Corrugated ribs on the outside and cushion on the inside. Top and bottom has a flat surface to facilitate stacking. Dimensions are 24" x 24" x 42". Sold individually.

Blow-molded, high-density polyethylene Corner Protectors provide superior protection for plant areas prone to damage by fork truck, hand truck or personnel traffic. They soften and deflect the impact helping to protect your facility assets, as well as your personnel and machinery. Designed for installation on overhead-door frame, H-frame racking and factory corners, or use horizontally as machine or rack guards or on loading or boat docks.

Our wall protectors help prevent damage to walls in areas with forklift, hand truck or drum traffic. These guards are made of high-visibility yellow, high-density polyethylene which never need painting and resist cracking and chipping. Each impact resistant panel can be mounted end to end, and features unique energy absorbing construction. (Anchors not included). Sold individually.

Low profile design provides easy loading and unloading. Customize your storage space with durable, modular platforms. Blow-molded, high-density polyethylene construction provides superior strength & chemical resistance. Patented grating provides optimal load bearing capacity & removes easily for spill clean up. 2-drum platform includes (2)-2' U-channel connection strips to join units. 30-gallon spill capacity.

Provides an easy method for cleaning small parts in solvents. Place the part on the dasher plate, press down, agitate and release. Dasher screen acts as a fire baffle. Hinged cover minimizes evaporation loss. FM approved. Sold individually.

Help prevent fires by safely disposing of cigarettes, cigar butts and matches with this steel Butt Can. The lack of oxygen inside the can quickly smothers any lighted butt that is dropped down the long disposal tube. Narrow tube design discourages disposal of other refuse. Tube comes off to empty can easily. Sold individually.

With the increase of smoke free buildings, many non industrial facilities have created outdoor designated smoking areas. The SAFESMOKER™ is an attractive product to complement any building or facility. Available in two sizes - 4 gallon (1208 Series) and the smaller 5qt. size (1206 Series)- SafeSmokers are made of high density polyethylene with UV inhibitors and a galvanized steel collection bucket. They are designed to restrict oxygen to quickly extinguish burning butts.

Safe… Durable… Dependable. For safe storage of flammable liquids. Sturdy safety cabinets, with adjustable shelves, are constructed of 18-gauge steel with double walled sides, top, bottom and doors. Walls have 1 ½ " air space. Upper and lower vents have 2" threaded fittings with fire baffle and cap. Each galvanized steel shelf is supported by 4 brackets and can hold up to 500 lbs. Four leveling legs are ideal for balancing cabinets on uneven surfaces.

Constructed of double-walled 18-gauge steel, these durable cabinets are ideal for safely storing paint and ink cans. Steel walls have 1 ½ " air space and vents with fire baffles. Cabinets are equipped with grounding attachment. Other features include a 3-point key lock, leak-proof door sills that are raised 2", a baked-on high gloss epoxy powder finish, and prominent warning labels. Sliding door models are self-closing with a fusible link which melts to close the door in case of fire.

Use as a stationary work station. Catch spills and leaks before they hit your floor. Durable 100% polyethylene construction has excellent chemical resistance and offers dependable protection. Features a sturdy removable grate for easy cleaning. 4-drum platform has an "in-line" design, positioning drums in a row. 6 and 8-drum platforms have low profile designs which make filling and dispensing easier. Convenient optional ramp provides easy access for drum mobility.

Use as a stationary work station. Catch spills and leaks before they hit your floor. Durable 100% polyethylene construction has excellent chemical resistance and offers dependable protection. Features a sturdy removable grate for easy cleaning. 4-drum platform has an "in-line" design, positioning drums in a row. 6 and 8-drum platforms have low profile designs which make filling and dispensing easier. Convenient optional ramp provides easy access for drum mobility.