Liners

The Auto-Air™ filtration system was developed to provide automatic reserve air in the event of either electrical failure or reduced pressure from the main air source while working in IDLH or hazardous environments. In the event of a pressure or electrical failure, the Auto-Air system automatically switches to the reserve air cylinder(s). Local and optional remote alarms signal the workers that the primary air system has failed and switched to the back-up air system.

The Auto-Air™ filtration system was developed to provide automatic reserve air in the event of either electrical failure or reduced pressure from the main air source while working in IDLH or hazardous environments. In the event of a pressure or electrical failure, the Auto-Air system automatically switches to the reserve air cylinder(s). Local and optional remote alarms signal the workers that the primary air system has failed and switched to the back-up air system.

The Auto-Air™ filtration system was developed to provide automatic reserve air in the event of either electrical failure or reduced pressure from the main air source while working in IDLH or hazardous environments. In the event of a pressure or electrical failure, the Auto-Air system automatically switches to the reserve air cylinder(s). Local and optional remote alarms signal the workers that the primary air system has failed and switched to the back-up air system.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

These portable Grade-D filtration systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide respirator users with Grade-D quality air and monitors for CO and/or Oxygen.

Update safe working days writing in the number with dry-erase marker. Update by wipe-off and write-in on the poly-coated space provided on the scoreboard. Scoreboards are screen-printed on .060" Uvi-Plas™ for 20" x 14" and 28" x 20". Sold individually.

ADA Braille Tactile Signs. Sign is sub-surface, 1/8" thick, one-piece molded construction. Top is clear acrylic with color, graphics and lettering underneath for protection. Other features include rounded corners and non-glare surface. Install with double-faced foam tape (included) for compatible frames (sold separately). Sold individually.

Bright yellow plastic floor signs are molded from sturdy polyethylene to withstand elements indoors and outdoors. Message is imprinted on both sides of the 25"h x 12"w panels. 2 X Fold-Ups™ can be read from all directions. Side arms are imprinted with "CAUTION" and snap in place to keep the sign panels in position and prevent the sign from collapsing. The top handle is designed for ease of carrying the sign and folds flat for transport and storage. Sold individually.

Aluminum Pocket Style Sturdy all-aluminum center board has a lower pocket to hold and store the SDS binder and training booklets. Pocket is welded on for added strength. The .063" thick aluminum has scratch-resistant, powder-coated finish. Backboard is 30"h x 24"w with a Perma-Bond sign. The pocket extends out 4 1/8"d with inside dimensions 5 7/8"h x 23 ¼"w X 4"d and two dividers to separate the binder and booklets. Center board kit is available with 1 ½" SDS binder and 10 training booklets.

Bright traffic cones provide maximum visibility under all conditions - indoors and outdoors.
Clearly outline hazardous areas to drivers and pedestrians. Place them in and around the plant and facility, as well as roadways. Conical design with square base makes them resistant to tipping. Durable, flexible, and resilient - springs back into shape after impact and being run over.

For Standard Cones. Slip onto plain cone for added visibility.

Handicapped Signs and Posts designed to last for years either indoors or outdoors. Huge selection ensures you'll find the sign you need. Specifications: Constructed with reflective sheeting on aluminum. Comply with the ADA by making sure your parking lot has the correct handicapped signs. 8'h U-Channel Posts are ideal for mounting and installing traffic and other signs. Baked green finish on hot rolled, high tensile strength steel gives you years of maintenance-free service.

Our traffic signs are heavy-duty .080" thick aluminum with an Engineer-Grade reflective surface. This provides additional visibility in low-light conditions and dark areas, when light is directed at the sign. They are screen-printed with UV-resistant inks to prevent fading. Aluminum provides the strength and durability of metal, yet does not rust. It has superior abrasion, corrosion and chemical resistance.

Our traffic signs are heavy-duty .080" thick aluminum with an Engineer-Grade reflective surface. This provides additional visibility in low-light conditions and dark areas, when light is directed at the sign. They are screen-printed with UV-resistant inks to prevent fading. Aluminum provides the strength and durability of metal, yet does not rust. It has superior abrasion, corrosion and chemical resistance.

Our traffic signs are heavy-duty .080" thick aluminum with an Engineer-Grade reflective surface. This provides additional visibility in low-light conditions and dark areas, when light is directed at the sign. They are screen-printed with UV-resistant inks to prevent fading. Aluminum provides the strength and durability of metal, yet does not rust. It has superior abrasion, corrosion and chemical resistance.

The NFPA diamond and HMCIS bar style warning systems are deciphered on this reference poster. The hazard codes are defined for each of the colors as well as identifying the target organ ratings and personal protective symbols. The colorful poster measures 22"h x 26"w and is printed on flexible plastic. Labels are the five color bar format of HMCIS. Fill in each of the color bars with the hazard codes and protective equipment code (in the white bar). Sold individually.

Especially useful in areas where wall signs are not an option. Made of a pressure-sensitive vinyl and laminated with anti-skid tread for safety and long use. All signs are 17" diameter.
Sold individually.

Especially useful in areas where wall signs are not an option. Made of a pressure-sensitive vinyl and laminated with anti-skid tread for safety and long use. All signs are 17" diameter.
Sold individually.

The labels help meet D.O.T. (49 CFR part 172) and EPA (40 CFR part 262) regulations for labeling substance containers for hazardous waste. Specifications do not include size or color of labels, however regulations do require that the labels be durable, in English, written sharply and in contrasting colors. Also, the view of hazardous waste labels are not to be impaired by other labels, attachments or markings. All labels are 6" x 6" pressure sensitive paper. Available in packages of 25.

The labels help meet D.O.T. (49 CFR part 172) and EPA (40 CFR part 262) regulations for labeling substance containers for hazardous waste. Specifications do not include size or color of labels, however regulations do require that the labels be durable, in English, written sharply and in contrasting colors. Also, the view of hazardous waste labels are not to be impaired by other labels, attachments or markings. All labels are 6" x 6" pressure sensitive paper. Available in packages of 25.