Flame-retardant. Foam is non-irritating. Moisture resistant. Offers the highest NRR available. Shape prevents shifting and keeps effectiveness of noise seal constant. Slow recovery PVC foam provides comfort with low pressure
Designed as a ladder belt, it may be worn inside or outside turnout gear. If worn outside you can even hang tools on it. The belt is constructed of 1 23/32" (45mm) nylon webbing tested to 9,000 lbf. (40.03kN). It has a butt strap which can be dropped forming a rappel seat. Includes a leather pad under the waist belt adjuster to prevent body contact with hard metal adjuster. When used as a ladder belt you will need an Omega #BINER18 carabiner.
A pulley for every need. All feature swing side cheeks. Celcon®, aluminum or steel sheaves. Use steel sheaved pulleys for ropes course with wire rope. Tope whole will accept two carabiners. Double ended pulley has a Becket to simplify block and tackle systems. Made in USA.
Stainless steel side plates place the CMI high line pulley a cut above the rest. Large diameter sheave allows a knotted 12" (12.5mm) rope to pass with ease. The sheave can be locked off to make a full strength tie off with the quick pins supplied. The CMI stainless steel side plates include a special groove providing a simple to use, secure location to store the quick release pins when not in use. The large center hole is used to support the load and will accept up to 3 carabiners.
Military models are welded entirely of .75" (1.9cm) and .375" (10mm) stainless steel (no flat straps that easily bend). Sand blasted finish. Military models include wire basket and strap kit. Meets military specifications and a 2,500 lbs. (1136kg) test load. All types can be supplied with plastic coating to resist corrosion. Weight standard models 33 lbs. (15kg), military models 38 lbs. (17.3kg). Made in USA.
The Rescue Probe accessory consists of a completely watertight and shock resistant speaker and microphone built into a Cylindrical Stainless Steel Housing with a nylon tip. The diameter of the Probe body is 1.65" which allows it to pass easily through a 2" bore hole. Attaching a Steel or PVC pipe to the threaded rear section of the Rescue Probe extends its reach. This allows rescuers to push it deeply into a collapsed structure through holes, cracks, debris etc.
Configured for a team of five Rescuers: four Entrants, one Attendant, for 100-foot entry. Additional Cable can increase entry distance up to 1,500 feet. Rescue Kit 1 can be expanded for up to 14 people using available options and accessories. Weight 52 lbs. (23.6kg). Made in Canada
Configured for a team of three Rescuers: two Entrants and one Attendant for 100-foot entry. Additional Cable can increase entry distance up to 1,500 feet. Weight 23 lbs. (10.5kg). Made in Canada.
The Confined Space Rescue Kit 5 is configured for a team of six rescuers consisting of two primary rescuers, two standby rescuers and a Hole watch and Team leader, for entries of 100' (maximum distance 1500'). The System can be configured for up to fourteen people using available modules and accessories. Weight 50 lbs. (10.5kg). Made in Canada..
The Victim Locator Kit is lightweight, portable, battery powered and can be operated by a single Rescuer. Multiple Kits can be deployed simultaneously on the same site without interfering with each other. It is a completely stand alone system that gives a single Rescuer the ability to search a collapse. On location of a victim, two-way voice communication is established immediately. Weight 17 lbs. (7.7kg). Made in Canada.
This excellent stainless steel edge guard will give you the needed abrasion protection when entering over sharp edges. will fit entries as small as 18". Works great with stretchers and people over manholes, ladder rungs, railings, pipes or any surface in which the lifeline may become damaged. weight 5 lbs. Made in USA
Store and dispense chemicals safely while keeping work areas clean and free of clutter. Drum cradles are constructed of 100% polyethylene. When used in combination with Eagle's spill containment platforms, this stacking system meets EPA Secondary Containment Storage requirements (40CFR 264.175). IBC Spill Unit includes a 100% polyethylene containment tub and heavy-duty metal platform for a 400 gallon secondary spill capacity and accepts IBC units from 38" to 50" in width.
Ensures safe storage of flammable and non-flammable acids. Durable cabinets are constructed of double-walled 18-gauge steel. Designed with 1 ½" air space between walls, and upper and lower vents with fire baffles for ventilation. Also features 3-point key lock, 2" raised leak-proof door sill, baked-on high gloss blue epoxy powder finish, and highly visible warning labels. High density polyethylene shelf trays won't rust or corrode and contain up to 1 gallon of spill.
5 gallon Metal butt can.
Ideal safety storage for companies that use pesticides and specialize in lawn care, golf course management, and agriculture. Green cabinets feature double-walled steel constructions, vents with fire baffle, cap, high density polyethylene trays, and large pesticide warning labels. Models FM approved. Sold individually.
Contains splashes and spills. Wide 18" diameter helps limit splashes and spills to protect workers and eliminate waste. Funnel fits 55 and 30 gallon drums. Spout fits in any 2" NPT bung opening. Accommodates drum fill gauge. Funnel with brass screen is ideal for straining. Funnel cover (sold separately) keeps out contaminants. The drip pan catches up to 1 gallon of oils, coolants, water or other non-aggressive liquids. Measures 10.5” x 10.5” x 3” . Sold individually.
Add protection to your facility or traffic area and prevent costly structural damage. Bollard Posts feature a durable baked on powder coat in safety yellow to provide high visibility. Each post is made of 1/4" thick steel mounted on 3/8" steel plated that are pre-drilled (3/4") for easy installation. The black HDPE post caps are included and can be removed to fill posts with concrete for extra protection.
No need to paint and scrape, these Bumper Post Sleeves make old bollard posts look like new! High-visibility yellow, high-density polyethylene construction with UV inhibitors resist fading, rusting or cracking. Eliminates annual maintenance while helping to protect vehicles and the post from impact damage. Unique vertical ribs provide extra impact protection while allowing for easy slide-on installation.
Column protectors are an affordable way to protect factory columns and beams and the machinery that may bump into them. Constructed of blow-molded 100% high-density polyethylene. Protectors fit 6", 8" , 10" and 12" round or square supports. Two halves attach and fit around column with easy-to-install straps. Corrugated ribs on the outside and cushion on the inside. Top and bottom has a flat surface to facilitate stacking. Dimensions are 24" x 24" x 42". Sold individually.
Blow-molded, high-density polyethylene Corner Protectors provide superior protection for plant areas prone to damage by fork truck, hand truck or personnel traffic. They soften and deflect the impact helping to protect your facility assets, as well as your personnel and machinery. Designed for installation on overhead-door frame, H-frame racking and factory corners, or use horizontally as machine or rack guards or on loading or boat docks.
Our wall protectors help prevent damage to walls in areas with forklift, hand truck or drum traffic. These guards are made of high-visibility yellow, high-density polyethylene which never need painting and resist cracking and chipping. Each impact resistant panel can be mounted end to end, and features unique energy absorbing construction. (Anchors not included). Sold individually.
