UltraTech
These containment units safely store either two or four drums outdoors. The P2 Plus meets EPA Container Storage regulation 40 CFR 264.175 and Uniform Fire code Spill Containment Regulations as well as helps meet new Stormwater Management Regulations-- NPDES, 40 CFR 122.26 (1999). Dimensions - 67 1/4” x 41 1/4” x 74”.The P4 Plus features roll-top covers that can be easily lifted from waist height to access drum tops, eliminating the need to reach near ground level. The low profile (8 3/4”)...
These devices channel pipe leaks away from plant personnel and machinery, keep fluid leaks off the floor and eliminate slip hazards and chemical exposure. The large 18” diameter opening captures overhead leaks both large and small. The bottom fitting connects to a standard garden hose, allowing fluids to be collected in a drum or tank. Made with a rugged, coated vinyl, the diverter ships complete with bungee cords and hooks for quick installation.
This epoxy putty tackles the toughest repair jobs. It adheres to steel, glass, masonry and most plastics and is a quick and effective solution to cracks, broken seals and leaks. simply pinch off the amount desired, knead to a uniform gray and press into place. The epoxy hardens like steel in only one hour. Sold per box of twelve.
This upscale cigarette receptacle complements high-end establishments and looks and feels like textured stone. The all fiberglass construction is weather and corrosion resistant. The design minimizes smoke exit and water entry. The fire-retardant additive in the fiberglass, and inner metal pail, help maintain fire safety. The unit can be secured with a chain or cable( not provided) to prevent theft and vandalism.
This device catches roof leaks and diverts them away from offices and equipment. The large, vinyl-coated fabric catches roof leaks and channels them to a standard hose hookup. The hose can then be directed to a proper drainage point. The heavy-duty grommets in each corner make installation quick and easy.
This economical containment for 275 (Part #2800 and 2801) and 550 ( Part # 2823 and 2820) gallon fuel and oil tanks is constructed of 100% polyethylene and will not rust or corrode and provides superior chemical and weather resistance. An optional 3/4” drain fitting is available. Use this unit with the optional Ultra-Self Bailer Part # 9935) for outdoor containment. This unit meets Stormwater, SPCC and EPA Containment Regulations. The Ultra- Self Bailer helps eliminate problems associated with...
This system allows compliance with regulations while storing IBC tanks outside. the upper roll-top door and lower swing-out doors combine to allow easy and convenient access to IBC. The unit safely stores an IBC tank with maximum dimensions of 52” x 52” x 61”. The low profile (28” height), 360 gallon containment sump allows safe material handling and dispensing. The forkliftable, lockable, all-polyethylene design will not rust or corrode. Helps meet new Stormwater Management Regulations- NPDES...
The unique, “living hinge” design of this system allows hands-free drive in/ drive out , with no need to manually raise or lower the endwalls. Once a vehicle has entered or exited, the walls automatically spring back to their vertical position. Both long sidewalls are held upright by PVC sidewall assemblies.
The Ultra-Drainguard keeps sediment and other pollutants from entering the water system with Ultra-Drainguard catch basin inserts. The oil and sediment model( Part # 9217) removes up to .87 gallons of hydrocarbons as well as dirt, sand and other contaminants. The oil and sediment plus model (Part # 9219) has the addition of X-Tex filter strips that increase oil and grease absorption by .51 gallons, offering a total capacity of 1.38 gallons of hydrocarbon removal. The trash and debris model (...
With the Ultra Hardtop Plus, multiple drums can be safely stored outdoors. The unit features separate, lockable compartments with a unique “2-way” entry system that allows quick access to all four drums. The roll-top covers can be easily lifted from waist height to access the drum tops. Swing out doors provide safety and convenience for loading and unloading drums. The low-profile (8 3/4”height) containment pallet positions drum-tops at a safe, convenient level to pour wastes into funnels or to...
This is an economical and portable containment unit for IBC’s. The low profile (28” overheight) allows for safe and convenient IBC tank handling and dispensing. The all polyethylene construction offers excellent chemical resistance and will not rust or corrode. The unit is forkliftable and allows convenient positioning to desired locations. The large 52” x 52” deck allows safe and convenient placement of IBC tanks, yet the 62” x 62” unit requires minimal floor space. The 360 gallon sump...
This system captures hazardous spills from railroad tanker cars and locomotives. Ultra-TrackPans have been designed to provide spill containment at industrial rail sidings, locomotive maintenance and fueling facilities. Available in virtually any length, Ultra-TrackPans may be used to collect small spills and leaks or to capture and channel off significant spills caused by defective equipment or a major overflow. The system features a slip- resistant design that makes the entire surface safe to...
The Ultra-Drainguard stops silt, sediment and other debris from entering curb inlets and catch basins. For use with combination catch basins with a street grate and curb opening. The heavy duty tension rods secure the Drainguard inside curb inlets-stopping sediment and other contaminants from entering the curb portion of storm drains. It fits grate sizes up to 40” x 40” and curb inlets up to 60” wide. Helps comply with NPEDS, 40 CFR 122.26 (1999).
This model captures dirt and sediment at construction sites and other high erosion areas. The rugged polypropylene construction can be easily rinsed and reused. The deep accumulation pocket (36”) can hold up to 500 pounds of soil, sand, sediment and dirt. It is designed for easy removal with a backhoe, forklift or other equipment. Helps comply with NPEDS, 40 CFR 122.26(1999).