Draeger
Easy to use, stand-alone and flexible: With the Bump Test Station, function tests of gas detection and warning devices can be carried out easily and independently of the location. ?The Bump Test Station does not require electrical power, providing complete mobility and freedom to locate where needed. The easy to use Bump Test Station performs a funtional test of the monitor for the gases connected. The data from Bump Test Station can be transmitted to the optional Dräger Mobile Printer/...
Accurate gas measurements are made easier with the Draeger CMS. This new generation spot check detection device is literally as easy as 1,2,3 to operate. Simply insert one of the over 50 chemical specific CMS chips and follow the instructions on the display as to when to move the slide switch. TWA levels are typically analyzed in 1 to 2 minutes. Upon completion of this process, the concentration is indicated on the LCD display. Every chip uses the exact same procedure so training is...
Direct-reading Dräger diffusion tubes were developed especially for personal exposure monitoring. These systems do not require the use of a gas detector pump because the contaminant molecules pass into the tube by diffusion processes and in this manner are brought into contact with the reagent systems.
For short-term measurements more than 160 Dräger-Tubes are available to measure the so-called spot concentrations of specific gases. A wide range of different gases and vapours can be detected and measured, e.g.: Determining and measuring concentration peaks, Measuring personal exposure in the inhalation area, Detecting leaks in pipelines, gas installations etc., and Air analysis in sewers, shafts and confined spaces.
Draeger offers SCBA cylinders in different sizes and construction to meet the demands of different applications. Cylinders are offered in 2216(low pressure) and 4500 psi(high pressure) operating pressures. Durations of 30,45 and 60 minutes ( at 40L/min breathing rate) are available. choose from aluminum, fiberglass hoop wrapped or lightweight carbon fiber full-wrap construction.
All gas detection sensors require periodic calibration or bump testing. Graeger offers a full rangev of cailbration gas mixtures in various concentrations and related supplies.
Dräger designed the RIT LifeGuard II emergency air supply based on input from the Fire Service. As a result, it ensures fast and easy air transfer to a downed firefighter or victim. Accommodating a 45- or 60-minute cylinder, the Dräger RIT LifeGuard is fast and easy to deploy. An intuitive, single-pull handle opens quickly, providing easy access to all components that a RIT needs. The high-pressure hose is attached to the interior of the lid, making it easy to find and quick to deploy. The...
Designed to offer optimal visibility, the Dräger FPS 7000 fullface mask sets new standards with 180-degree, panoramic visibility with the large distortion-free polycarbonate visor using heat-resistant thermoplastic. To prevent fogging of the visor, the innovative design provides an even distribution of air across the mask. To accommodate faces of different shapes and sizes, the FPS 7000 is available in small, medium, and large. Additionally, the inner mask that covers the nose and mouth comes...
Designed to connect seamlessly to the Dräger FPS 7000 fullface masks, the FPS-COM 5000 ensures clear communication through either a voice amplifier or a tactical radio — even in the most extreme conditions. Digital noise-reduction technology eliminates breathing sounds, ambient noise, and acoustic feedback for crystal-clear communication. A flexible, gooseneck earpiece adjusts easily to different sizes and shapes. Two speakers mounted on the sides of the FPS-COM 5000 point in the direction the...
Designed primarily for the municipal fire service and other emergency responders, this kit quickly identifies and quantifies a wide range of chemical substances in less than 5 minutes using the Draeger Simultest Sets. The HazMat Kit includes three Simultest Sets for measuring 15 different organic and inorganic chemicals and /or chemical families. Broad scale measurement and identification is as easy as using set I. II and III. The kit comes with an Accuro pump, 10 simultest sets, test set...
All gas detection sensors require periodic calibration or bump testing. Graeger offers a full range of cailbration gas mixtures in various concentrations and related supplies.
The Dräger Pac® 6000 disposable personal gas detector measures CO, H2S, SO2 or O2 reliably and precisely, even in the toughest conditions. The robust design, quick sensor response times, and a powerful battery ensure maximum safety for up to two years with virtually no maintenance required.
The robust Dräger Pac® 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H2S, SO2 or O2 quickly and precisely. Quick sensor response times and a replaceable battery also ensure safety.
With the robust Dräger Pac® 8000, you'll be well equipped for tough conditions: this non-disposable, personal single-gas detection device is a reliable and precise instrument, which detects hazardous concentrations of twenty nine different gases, including special gases like NO2, O3 or COCl2.
The Dräger Pac® 8500 single-gas detection device is a reliable and precise instrument even under the toughest of conditions. The detector can be equipped with a hydrogen-compensated CO sensor or a Dräger dual sensor. The dual sensors provide the option of measuring two gases at once: either H2S with CO or O2 with CO.
Dräger PARAT escape hoods are designed to be easily donned and protect users from toxic industrial and fire-related gases, vapors and particles for at least 15 minutes.
Effective firefighting requires trusted breathing protection in the harshest environments. The Dräger PSS® 5000 provides the budget-conscious fire department with an ergonomically advanced SCBA. With a wide range of features – such as bi-lateral hose routing and cylinder Quick Connection – the PSS® 5000 meets the needs for today's complex fire grounds.
The self-contained breathing apparatus, or SCBA, is the foundational tool that provides the greatest amount of airway protection from toxic gas and harmful particulates resulting from a fire. It’s essential for modern firefighting. As the inventor of the modern-day SCBAs specifically for firefighters, this year marks 80 years since that first Dräger SCBA. The Dräger SCBA provides the most robust breathing protection combined with unparalleled ergonomic comfort. Dräger proudly offers the latest...
All gas detection sensors require periodic calibration or bump testing. Graeger offers a full range of cailbration gas mixtures in various concentrations and related supplies.
Easy to use with one hand only. See more and make better decisions with optimal display options provided by the Dräger UCF 7000 thermal imaging camera. The camera is intrinsically safe (ATEX zone 1) and offers the maximum level of safety and reliability in potentially explosive atmospheres.
An explosive atmosphere may be prevalent especially for calls where there is no fire. This means the equipment used must not be a source of ignition. The Dräger UCF 7000 is the tool of choice even in these...
New generation of thermal imaging cameras - The latest in Thermal Imaging Technology. Easy to use: User-friendly one-hand operation. Excellent image quality with a resolution of 384 x 288 pixels. Integrated laserpointer to safely pinpoint hazards and as an "extended index figure". Black box record for up to two hours. Video playback in the camera display. "Snapshot" - function: freeze-frame of the thermal image to check out difficult to access areas easily and quickly take a...
The UCF 9000 Thermal Imaging Camera Truck Kit Includes: UCF 9000 Camera, Desktop Charger, Charging Cords, IFU, Software Disc, Crawling Plate, Truck Mount and Retractable Lanyard.
Small, light, robust and can be operated with just one button: The compact thermal imaging camera Dräger UCF® FireVista provides excellent picture quality even under the most difficult operating conditions. The camera is ready for immediate use and provides the best possible support on firefighting deployments. Outstanding quality – especially in the price.
The innovative Dräger X-act® 7000 analysis system consists of Dräger MicroTubes and an opto-electronic analysis device that lets you precisely measure gases in the low ppb range. It gives you precise results right on site, replacing slow, expensive lab analyses. It's extremely easy to use: insert the Dräger MicroTubes, start measuring, then read out the test result.
The automatic tube pump Dräger X-act® 5000 is the first all-in-one solution designed for measurements with Dräger Short-term Tubes and for Sampling Tubes and Systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols.
Dräger’s X-am® 2500 accurately detects O2, CO, NO2, SO2 and H2S and is the only 1–4 gas monitor you need in industrial and refinery applications. The X-am® 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety. It is approved for most markets including mining, oil & gas, chemical, fire and hazardous response, government and many other applications.
?The Dräger X-am® 3500 was especially designed for clearance measurements and personnel monitoring applications. The 1 to 4 gas detector reliably detects flammable gases and vapors as well as O2, CO, H2S, NO2 and SO2. The innovative signaling design and extensive range of accessories ensure optimum safety and easy handling.
The smallest gas detection instrument for up to 5 gases.
The Dräger X-am 5000 belongs to a new generation of
gas detectors, developed especially for personal monitoring
applications. This 1 to 5-gas detector reliably measures
combustible gases and vapors as well as oxygen and
harmful concentrations of CO, H2S, CO2, Cl3, HCN, NH3,
NO2, PH3 SO2 and organic vapors.
Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapors and oxygen all at once – either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.