CRC

Plastic,ABS and Noryl® safe lubricant, penetrant and corrosion inhibitor that helps prevent electrical malfunctions caused by water penetration, humidity, condensation or corrosion. Restores resistance values and helps stop current leakage.
A versatile petroleum based compound that forms a clear, thin film that lubricates and protects against wear and corrosion. Multi-purpose product lubricates, protects, displaces moisture, and cleans.
Tacky non-drying water-resistant film minimizes drive belt slippage resists water wash-off maintains belt flexibility and prevents loads from slipping on conveyor systems. Food Grade,Colorless - will not stain finished goods transported on conveyor systems
A special blend of synthetic lubricants, solvents and Molybdenum designed to keep chains and wire rope in peak operating condition. Resists water wash-off and high-temperature sling off. Absorbs pin/bushing shock and cushions rollers pins and bushing. Can be applied with guards in place to eliminate costly downtime
Penetrates pores of substrate and bonds to surface for long-lasting lubrication. Withstands high pressures up to 50 000 psi. Contains no chlorinated solvents or O.D.P. Air dries in 5-to-10 minutes cures in 2 hours at room temperature. Works as boundary lube to as cold as -200 ™. Works to 750 ™ intermittently. Non-conductive. DanVern™ standard valve
Silicone fluid with superior lubrication and temperature viscosity characteristics. Use on all metallic and non-metallic surfaces. Reduces friction and galling even on metal-to-metal contact areas. High temperature (-100 to 450 F) high pressure (withstands 1200 psi Falex test). High grade release and parting agent. Clear non-staining odorless film resists moisture. Convenient 360™ spray valve - can be sprayed from any position
Multi-purpose silicone spray for food processing and handling applications. Forms a colorless, odorless, non-staining film. Eliminates binding and sticking in most metal to non-metal applications. Meets FDA Regulation CFR 21-178.3570. NSF H1 Registered. Harmless to most rubbers and plastics. Wide effective temperature range . Excellent release agent and lubricant for all surfaces. Convenient 360™ spray valve - can be sprayed from any position
POWER LUBE is a high performance, multi-purpose lubricant that utilizes PTFE and extreme pressure additives to provide unparalled lubricating performance. It has twice the load carrying capacity of most general purpose lubricants.
Lubricates and protects pneumatic equipment. Increases torque assures long tool life. Reduces rust varnish sludge and acids
Lubricates and protects pneumatic equipment. Increases torque assures long tool life. Reduces rust varnish sludge and acids
Cutting Oil is a superior thread cutting lubricant for use on all types of metals, including brass, copper and aluminum. Reduces heat and friction to ease cutting and increase cutting tool life. Sulfur-free
For use on food processing equipment. Penetrates to loosen rust, scale, dirt and corrosion. Meets FDA Regulation CFR 21-178.3570 for incidental food contact. Contains no silicone and is virtually odorless and colorless. Will not harm metal wood plastic or painted surfaces. Convenient 360™ spray valve - can be sprayed from any position
Effectively removes grease, oil, tar, etc. to increase operating efficiency of equipment. It evaporates quickly, leaves no residue and has no flash or fire point, making it an excellent alternative to 1,1,1-based cleaners. Use caution on plastics.
Non-chlorinated degreasing solvent that quickly removes oil, grease and other contaminants. Perfect for applications requiring quick turnaround and where a low flashpoint solvent can be used. Fast drying to help minimize downtime. Leaves no residue. Non-conductive and non-corrosive.
New Low VOC Formula. Removes grease, oil and lubricants with no water wash-off. Controlled evaporation and leaves no residue. Pleasant citrus scent. NSF C1 Registered. Biodegradable. Dries fast. 360™valve allows spraying in any position. Non-corrosive non-abrasive and non-staining
Non-chlorinated, zero VOC formula for cleaning where chlorinated solvents are not acceptable. High flashpoint of 180°F. Effectively removes soils with no residue build-up. Use caution on plastics. High flash point. Leaves no residue. Non-conductive and non-corrosive. High dielectric strength. Low odor compound unlike citrus-based products. Contains no Class I or Class II Ozone Depleting Chemicals
Effectively removes contaminants to increase operating efficiency of energized electrical equipment. It evaporates quickly, leaves no residue and has no flash or fire point. Designed and labeled to be used on equipment where energy and/or residual exists during cleaning.
A blend of natural citrus and organic solvents that effectively clean and degrease. Perfect for use on all metals. Leaves no sticky residue. NSF C1 Registered.
Effective degreasing action with fast evaporation and no residue. The non-flammable, VOC exempt formula contains no Class I or Class II Ozone Depleting Chemicals. Use caution on plastics and paints.
The original brake parts cleaner. Formulated to quickly & effectively remove grease, brake dust, brake fluids, oils, & other contaminants from brake parts, lining, pads. Cleans fast/dries fast/no residue. Degreases instantly. Non-flammable. Works without disassembly
The Brake Cleaner to use where compliance calls for a chlorine-free product. Contains no chlorinated solvents. Formulated to quickly remove brake fluid, grease, oil, and other contaminants from brake linings & pads. Cleans fast/dries fast/no residue. Degreases instantly. Works without disassembly.
Maximizes carburetor performance, improves fuel system performance and ensures maximum fuel economy. Low VOC formula. Will not harm oxygen sensors or catalytic converters. Effectively dissolves deposits such as gum, sludge and varnish. Fast acting cleaning action
Instantly saturates insects and their nests with a 20’ jet blast. Knocks down and kills on contact. Now with residual action that kills wasps and hornets returning to the nest.
An acrylic based, sacrificial zinc coating that protects ferrous metals from oxidizing even when scratched or abraded. Creates a barrier film between the environment & the base metal to prevent the formation or spread of rust & corrosion. Fast-drying dries to the touch in 15 minutes
Maximizes carburetor performance. Quickly dissolves carburetor deposits such as gum sludge & varnish to improve fuel system performance & enhance fuel economy. Harmless to catalytic converters and oxygen sensors https://www.arksafety.com/sites/default/files/125-05081.eps.jpg
Removes dirt light oils & other contaminants. Evaporates quickly leaves no residue has no flash or fire point. Use caution on sensitive plastics. Non-conductive & non-corrosive. Effective alternative to HCFC (141b) based cleaners which have use restrictions and may only be sold to professional users for applications consistent with the regulations
Evaporates quickly and leaves no residue. Non-flammable non-chlorinated non-staining and non-corrosive. High dielectric strength of 27 600 volts. Contains no VOCs. Contains no Class I or Class II Ozone Depleting Chemicals. NSF Registered (K2) for use in meat and poultry plants
The non-flammable, VOC exempt formula is designed for energized equipment use only. Non-flammable. Fast evaporation leaves no residue. Non-staining non-corrosive and non-conductive. High Dielectric Strength of 37 500 Volts. Contains no 1 1 1-Trichloroethane
Advanced Technology Formula contains no known ozone depleting substances or VOCs. Evaporates quickly and leaves no residue. Non-flammable non-chlorinated non-staining and non-corrosive plastic safe formula is an optimal alternative to CFC, HCFC and flammable contact cleaners. NSF K2 Registered. High dielectric strength.
An aggressive cleaner specifically for energized electrical equipment. Non-flammable formula dissolves grease, oil, dirt, & wax without having to remove parts.
Suitable for cleaning sensitive electronics and electrical equipment. Evaporates quickly, leaves no residue and is safe to use on all plastics. Use where lower flashpoint cleaners are acceptable. NSF K2 Registered.
A powerful blast of product removes dirt and dust and embedded debris on energized equipment or surface without damaging sensitive components or surface finish. Non-flammable no residue and non-abrasive. Safe on all plastics
Safely eliminates debris from sensitive electronics appliances and equipment. No wetting or clumping. Plastic safe. Non-abrasive non-corrosive. Non-ozone depleting
Cuts through dirt, dust, fingerprints and haze deposits. Provides professional strength streak-free glass cleaning even on delicate glass surfaces. Biodegradable ready to use. Non-abrasive foaming action. Non-flammable non-ozone depleting. Streak-free performance
Removes baked on fiber gaskets, gasket adhesives and sealants. Dissolves and aids removal of paints, lacquers, adhesives, and varnish. Contains no methylene chloride . Loosens carbon deposits. Protects equipment surfaces by reducing the need for excessive scraping.
An industrial strength, low viscosity super penetrant designed to quickly loosen and free seized, bound or frozen fasteners. Quickly permeates rust, scale, gum, grease and corrosion. Outperforms the competition as verified by independent tests.
A no-compromise penetrant that attacks corrosion to free corroded fasteners & mechanical components. A super-fast, powerful, concentrated penetrating solvent that loosens rust scale & corrosion. Instantly penetrates minute & tightly fitted crevices.
Assures fast economical starts in extremely cold or humid climates. Upper cylinder lubricant minimizes wear during cold starts. Effective to -65™. For diesel and gasoline engines
Long-term indoor/outdoor corrosion inhibitor that provides protection of all equipment subject to heat, humidity, chemicals or severely corrosive atmospheres. Use on machined surfaces & assemblies subjected to long periods of storage. Indoor/Outdoor protection up to 2 years.
High-performance coating of >93% pure zinc that electrochemically bonds with ferrous metals to form a galvanic cell. It actively fights rust and corrosion. Use as a touch-up for damaged galvanized coatings. Dries quickly. Outdoor protection: 1 - 2 years.
Convenient, easy & safe product to test the functional ability of a smoke detector. It also checks for obstructions or debris which clog detector vents & prevent smoke from properly entering the sensing chamber. Safe for use on Photoelectric and ionization type detectors.
A high purity, NLGI Grade 2 lithium based grease. Provides superior lubrication & durability in any weather and most temperatures. It is a versatile grease designed for light duty applications requiring a long grease life. Will not break down or run out.
Heavy-duty lubricant that withstands high temperature and high pressure. Red color allows for easy visual inspection of film coverage.
A superior multi-purpose certified lithium complex based NLGI #2 grease. Contains extreme pressure, anti-wear, & anti-oxidation additives. Ideal for high temperature & performance applications. Drop point 500°F
Superior lubrication and durability in any weather or temperature. Perfect for use as a break-in lubricant for bearings or as a general purpose lubricant and corrosion inhibitor for tools, machinery and equipment.
Uses a double strength formula to repel up to twice as long as common consumer insect repellents. Protects outdoor workers by reducing the risk of contracting Lyme Disease from ticks when sprayed on exposed skin and clothing
Will not damage plastic connectors and other insulating materials. CRC trigger provides a dense accurate spray that will reach over 20 feet to drench harmful insects and their nests. The only wasp and hornet killer in the industry with CRC's patented M.S.D.[L.] a current MSDS printed on the reverse side of the product label