Class 3-Type R Hi-Vis Yellow Pullover Hoodie. 2” 3M™ Scotchlite™ Reflective Material: One 360 Horizontal stripe, two vertical and two sleeve stripes. Draw Cord Hood. Pockets: 1 Pouch, 100% ANSI Modacrylic/Poly/Cotton Fleece Blend 14.25 oz. Flame Resistant Thread. Classified by UL to NFPA 2112-2018, CAT 3 Protection- ATPV 28 Cal/Cm², ASTM F1506, NFPA 70E, NFPA 2112-2024

Midnight, Flame Resistant Pull Over Hoodie. Draw Cord Hood. Pocket: 1 Pouch. 100% ANSI Modacrylic/Poly/Cotton Fleece Blend, 14.25 oz. Flame resistant thread. Classified by UL to NFPA 2112-2018, CAT 3 Protection- ATPV 28 Cal/Cm², ASTM F1506, NFPA 70E, NFPA 2112-2022

14 in X 29 1/2 in, Blue. Lightweight super absorbent material holds water without weighing you down. Instant cooling relief, just add water; reusable, easy to charge. Machine washable.

2” Silver reflective tape: backed by contrasting fabric; 100% Polyester Solid Top Mesh

•Non-ANSI
•No reflective tape
•Elastic side straps
•100% Polyester Mesh
•Pockets: 1 inner lower left
•Hook & loop closure

Keep workers cool and comfortable indoors or out with durable and disposable sweatbands. Simply dip in cool water, squeeze out and place on the forehead. Choose from economy model, reinforced deluxe model or deluxe clip-on model for use with hard hats, face shields, or welding helmets. Sold individually. Bands measure 8 5/8"x1 ¾".

Includes all of the great features of our original bomber jacket. Class 3, 2” 3M™ Scotchlite™ Reflective Material: One 360° horizontal, Two vertical, and four 360° horizontal sleeve. 100% ANSI Polyester with PU coating - breathable, waterproof with sealed seams. Removable 100% black polyester fleece liner. Can be worn 4 ways.Removable outer jacket sleeves. Black collar, cuffs and waistband. Rollup and removable hood. Weather resistant construction. Pockets: 2 outside, 1 inside, 1 radio.

Hot Rods Toe Warmers. Adhesive "Stays put on your foot" Pack of 5 pr

Hot Rods Hand Warmers. Regular size, Pack of 5 pr

Universal wrist wrap. Sold per each

For soft comfort and excellent warming, these navy blue, single layer liner is made of 100% cotton twill with a long neck design. These liners feature a Velcro® closure at the neck, elastic gap eliminator, and a reflective strip on the back. Some styles available with Cotton shell, lining and fasteners are flame resistant. Sold individually.

Class 3.
2” 3M™Scotchlite™ Reflective Material: One 360° horizontal, One vertical, two 360° horizontal sleeve, two 360° horizontal leg stripes.
100% ANSI 107-2010 Polyester hard-wearing 300 Denier maximum breathable waterproof PU and PTFE bicomponent transfer laminate membrane with sealed seams.
Lined with Thinsulate™ Insulation.
Detachable, peaked Thinsulate™ lined hood with adjustable Velcro and D ring.
Storm flap with YKK® 2-way zipper.

Outer: FR-treated cotton.
Liner: FR-treated cotton with 3M Thinsulate Platinum Insulation Flame Resistant.
Thread made of Nomex® IIIA brand fiber.
Meets ASTM F1506.
ATPV=26 cal/cm².
NFPA 70E/HRC=3.
Flame Resistant for up to 50 washings.
* Nomex® is a registered trademark of E.I. du Pont de Nemours and Company.

Fabric-covered cap gives you a sporty look and protects you from bumps and scrapes. Features tough polyethylene shell with soft, comfortable inner foam cushion. Shell also fits in "high profile" style baseball caps. Ideal for meter readers, food processing, and other industries that don't require full hard hat protection.

Five layers of weather blocking fabrics that converts from a jacket to a vest. High-visibility fluorescent yellow material with 360 degree of 2" wide 3M™ reflective striping. The jacket meets the new ANSI 107-1999 Standard for high-visibility safety apparel and the ASTM F1671 Standard for resistance to Blood-borne Pathogens. Please specify size when ordering. Sold individually.

4.5 oz. fabric made with Dupont™ Nomex® IIIA brand fibert is a protective aramid fiber which is permanently flame resistant with excellent chemical resistance. ATPC 4.5 cal/cm2. Thread and Zipper made of Nomex® IIIA brand fiber. Non-sparking covered snaps. One-piece action back with elastic waistband. meets or exceeds NFPA 70E, 1971, 1975, 1977, ASTM F1506 Arc thermal performanced tested. HRC level 1. Pockets: 2 chest, 1 tool pocket, 2 back, 2 hip, 2 front pass throughs with snaps.

Safety helmet liners keep the cold wind out, trap warmth inside and prevent moisture build-up. Knitted from flame-retardant spun polyester, they are available in two styles. The Cap Style comes in Orange polyester. The Full-Face Style comes in Red polyester. One size fits all. Sold individually.

Class 2, Breakaway Mesh Vest. 2” 3M™ Scotchlite™ Reflective Material: One 360° horizontal stripe, two vertical stripes. 100% ANSI Polyester Mesh. Pockets: 1 outside lower, 1 inside chest w/ hook & loop. Hook & loop closure

Class 3. 2” 3M™ Scotchlite™ Reflective Material: One 360° horizontal stripe, two vertical stripes, and four 360° horizontal sleeve stripes.
100% ANSI Wicking Polyester.
Elastic cuff & waistband.
Pockets: 2 lower front.
9 oz. fabric weight.
Zipper closure.

Available in Hi-Viz Yellow or Hi-Viz Orange in Sizes S-10X.

MiraCool™ products are ideal for factory, construction, laundry room workers, welders, painters, chefs or anyone working or playing in a warm environment. Just soak in cold water for 10-20 minutes. The poncho stays hydrated for several days, which is very economical, and is reusable thousands of times. Works without freezing or the need for ice. This #1 cooling product increases alertness and productivity.

Use MiraCool™ technology to keep your neck or head cool all day long. Cooling crystals absorbs to work with the evaporation process in keeping pulse points feeling cool. Soak in cold water 10-20 minutes before use. Shipped from a variety of colors and patterns for fun, attractive and convenient cooling. MiraCool™ Headband is designed for one-size-fits-all comfort around the head as well as quick and easy tying, so it incorporates more length than the bandana.

Keep your employees warm when the temperature is cold. Select from three liner styles to get the one that fits your needs. The Quilted Winter Liner features a wind-resistant nylon shell with a fleece lining. The Economy Liner is 100% flame-resistant (FR) cotton flannel in the color of gold. The Cotton Twill Fleece Liner features a 100% FR cotton twill shell with fleece lining for two layer warmth. Blue shell with red lining.

OccuMitts can be worn under work gloves or alone. OccuMitts are ideal for computer users, garment workers, electronics assemblers, food processors, meat cutters, carpenters, painters, musicians, mail sorters, mechanics, dentists, dental hygienists, cashiers, case cutters, hair stylists, pet groomers, garment workers, gardeners, people with arthritis and more.

Washable, soft and comfortable Heavy weight terrycloth band with rust-proof fasteners. Fits most safety headgear suspensions.

Fits snugly over hard hat. Blocks wind tunneling inside the crown. Traps warmth to keep head and ears warm. Folds up on the outside of a hardhat when not needed during breaks. Does not have Thermotex ear barriers reflective strip gap eliminator or warming pack pockets. Flame resistant