Sort by

Search

  • 7471™ Primer T™

    A solvent-based primer that speeds the cure of all Loctite® brand anaerobic adhesives and ensures proper cure on inactive metals. Has on-part life of 7 days and dries in 30 - 70 seconds

  • ProLock™ Tight®

    Removes grease, lubricants, cutting oils, fuel oils, road salt, tar, light carbon, food stains, wax, animal fats, mildew, and soot.

  • 7649™ Primer N™

    A solvent-based primer that features very long on-part life of 30 days. Use to speed the cure of all Loctite® brand anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature. Dries in 30 - 70 seconds

  • Chisel® Gasket Remover

    Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets eliminating scraping and sanding. Works on wood non-corrosive on aluminum. Not for use on plastics linoleum or synthetic fibers

  • ODC-Free Cleaner & Degreaser

    A non-aqueous hydrocarbon-based solvent designed for cleaning and degreasing surfaces to be bonded with adhesives as well as for general purpose industrial cleaning. Will not cause flash rusting on water sensitive parts. Drying time is 5-20 minutes (without wipe) and 1-2 minutes (with wipe). Contains no ozone depleting compounds

  • 545™ Thread Sealant

    Hydraulic/Pneumatic Fittings A liquid sealant for locking and sealing high pressure fluid power systems with tapered fittings. Contains no fillers and will not foul valves or fluid filtering systems

  • N-7000™ High Purity Anti-Seize

    Metal Free Metal-free formulation provides high levels of purity and excellent lubricating properties. For Class 1 2 and 3 power plant hardware

  • 5900® Flange Sealant

    Heavy Body RTV Silicone Superior flexibility and adhesion. Provides instant seal. Non-corrosive low odor and low volatility

  • 638™ Retaining Compound

    Maximum Strength For use where high dynamic force or cyclic loading is expected. Locks cylindrical assemblies up to .010" diameter clearance

  • Fixmaster® Fast Cure Epoxy

    Mixer Cup Pre-measured. Fills porosities and can be used to build up worn parts https://www.arksafety.com/sites/default/files/442-21425.eps.jpg

  • 246™ Threadlocker

    Medium Strength/High Temperature This threadlocker resists oil and mild surface contamination at continuous temperatures to 450™. Suitable for fasteners between 1/4" and 3/4" diameters

  • 569™ Thread Sealant

    Hydraulic Sealant A high strength hydraulic sealant that contains no fillers or particles

  • AA 330™ Structural Adhesive

    AA 330™ General purpose. Good impact resistance. Ideal for bonding dissimilar substrates like PVC, phenolic, and acrylic compounds. Medium to high viscosity. Activator required, Loctite® SF 7387, sold separately.

  • SF 754™ Rust Treatment

    SF 754™ One-step rust treatment goes on white and converts rust to a durable, black, metal-protective coating in 10 minutes. Wire brush parts and apply with brush or spray. Surface rust must be present. Use as a primer or finish coat. Resists temperatures to 250º F intermittent, 200º F continuous. Known as Extend® Rust Treatment.

  • 272™ Threadlocker

    High Temp/High Strength Provides a fast cure on most surfaces. Including "as received" fasteners. Heat and hand tools are required for disassembly

  • Clover® Silicon Carbide Grease Mix

    Standard abrasive paste for fast metal removal. Produces a smooth flat surface but not a polished one. Leaves a rust preventing film on lapped surfaces. Uses include lapping and honing and grinding activities for valve seats gear teeth dowel holes in dies bushings and more

Pages