Sort by

Search

  • Knee Pads

    Abrasion-Resistant Caps ensure long wear. MaxKnee features an outside abrasion-resistant ABS knee cap and extra long pad for maximum comfort. Two fully adjustable Velcro® straps ensure a custom fit. FlexKnee consists of a lightweight pad long lasting wear. Non-Marking FlexKnee permits the user to move around the work area without marking or damaging delicate surfaces. Ideal or tile work.

  • Wrist Wrap

    Sturdy wrist wrap helps reduces the painful systems like Carpal Tunnel. Black, One size fits all. Sold Indivually.

  • Standard Cooling Vest

    Our Standard Cooling Vest is lightweight and when soaked in water for 5 to 9 minutes, provides all day cooling comfort. Snap closures allow for quick access. Available in royal blue in 3 sizes, 100% cotton and hand washable.

  • Standard Vest for Cooling Inserts

    Ideal for under HazMat suits and other protective clothing. This vest features four pockets for inserts, zipper front and adjusts with Velcro over choulder and side straps to help achieve a snug fit. Added comfort with 2 layers of 100% cotton. Royal Blue.

  • Full & Half Mask Supplied Air Systems

    Conveniently combines all the most frequently requested elements into one easy-to-order supplied air system. Complete System includes ambient air pump, continuous flow full face piece or half mask supplied air respirator with breathing tube, 50ft. hose, and all required fittings. Pumps are portable, oil-less, and produce no carbon monoxide, oil vapor, or oil mist.

  • Constant Flow Hood Systems

    Constant Flow Full Respirator Hood Systems are designed for easy handling and use. Complete with ambient air pump, supplied air respirator hood, breathing tube, belt 50ft. air hose, and all necessary fittings. Pumps are portable and oil-less, produce no carbon monoxide, oil vapor, or oil mist, and eliminate the need for carbon monoxide monitoring and alarm systems.

  • Source Pre-Filter

    Where air quality is especially low, this free-standing or wall-mounted particulate assembly helps extend the life of the filter panel’s disposable filters by removing liquids and contaminates down to 5 microns. It is equipped with an adjustable regulator pressure gauge and meets the NIOSH requirement for point-of-attachment.

  • Manhole Guard Rails

    Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 27" square x 4" for easy storage. Weighing 34 lbs., the strong, one inch tubular .078 gauge steel construction is powder-coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly.

  • Manhole Lid Lifter

    Lift even the heaviest covers with ease. Takes the strain out of lifting heavy manhole covers. One-piece lifter features an all-steel handle with cadmium plating to fight rust. Rubbers grips on hand and foot prevent slips. Steel hook locks into the pole for safe storage.

  • Deluxe Work Tent

    Easy to use and very durable, the Deluxe Work Tent features quick set-up from the inside or outside with fiberglass rod frame. These frames are uniquely designed to not pull out or poke through the fabric. A handy attached roll-up flap provides compact storage, easy transport, and means no missing storage bag.

  • Manhole Umbrellas

    84" diameter umbrella offers low cost protection from sun and rain. It features heavy duty vinyl in safety yellow with a sturdy, 92" two-part metal pole that tilts for convenience. It can be pushed into the ground or strapped to the manhole guard rail. For easy storage, it collapses to 4" x 6" diameter.

  • Economy Work Tent

    Utility shelter springs from backpack into full size (6'1" x 6'w x 7'h) tent in seconds. Made from water-resistant, flame-retardant nylon with 360deg. reflective striping. Quick set-up from the inside or outside, with two floor-to-floor fiber poles for better stability and structural strength.

  • Portable Dewatering Pumps

    These submergible pumps discharge out of the top, which allows continuous operation at low water levels and extended dry-runs with out overheating the motor. All pumps feature quick connect fittings and all are powered by 110v AC. The 1 HP Deluxe Pump moves 96 gpm, has a maximum operating depth of 39..5', and will pump out down to 2" deep.

  • Saddle Vent®

    The Saddle Vent® Tank and Manhole Ventilation provides continuous access and sunlight to manholes during ventilation. Unobtrusive vents take up only 3" of space allowing for easy entrance and exit. Manhole Saddle Vent® is 43 ½"L x 14"W x 8" outside diameter. Tank vents measure 27 ¾"L x 13 ¾" W x 8" outside diameter.

  • Venturi Blowers

    The Venturi Blowers from Allegro are a perfect solution to moving air in refineries, utility and power plants, shipyards, paper and pulp plants, the marine and steel industry and manhole operations. Anywhere where fumes that may be poisonous, explosive or hazardous from process towers, tanks, large pipes or confined space need to be removed.

  • Heavy Duty Blower

    High performance and durability are built into this Heavy Duty Blower. Its large 1 1/2 hp motor and 8" ports deliver high CFM allowing workers to draw out or push air in. It is designed with a large metal base with locking wheel casters and three carry handles for easy maneuverability. The electric motor is totally enclosed and the high impact polyethylene housing offers greater durability.

  • Heavy Duty Explosion-Proof Blower

    Electric, explosion-proof motor is UL/CSA listed. Single-phase motor includes Hazardous Location NEMA rated 115V plug for use with explosion-proof socket (included). ABS housing provides non-sparking safety. Meets Class I, Divisions I and II, Group D and Class II, Divisions I and II, Groups F and G Hazardous Location Requirements.

  • Standard Blower

    Excellent for most ventilating needs, especially confined space. Designed with tough ABS housing, metal safeguards and a steel fan for durability. Two 8" ports offer positive ventilation or fume extraction, and the metal base with feel offers greater stability. The electric motor is cage-enclosed for protection. Comes with an on/off switch and built-in carry handle for increased portability.

  • Gasoline Blower

    Perfect for remote location where electricity is unavailable, this gasoline-powered, 3 ½ hp blower offers high flow rates. The 8" ports and steel guards provide safety and the ABS housing with built-in handle offers durability and convenience. It is designed with unique spring-loaded feet that minimize blower walking and offer greater stability.

  • Gas Blower / Honda

    Offering portability and the same output and weight as the 9505, plus the durability of a Honda engine. Polyethylene housing with buil-in handle offers convenience in transport. The sturdy metal base offers great stability. Blower includes 10 foot metal exhaust hose extension.

Pages