UltraTech
These containment units safely store either two or four drums outdoors. The P2 Plus meets EPA Container Storage regulation 40 CFR 264.175 and Uniform Fire code Spill Containment Regulations as well as helps meet new Stormwater Management Regulations-- NPDES, 40 CFR 122.26 (1999). Dimensions - 67 1/4” x 41 1/4” x 74”.The P4 Plus features roll-top covers that can be easily lifted from waist height to access drum tops, eliminating the need to reach near ground level. The low profile (8 3/4”)...
These devices channel pipe leaks away from plant personnel and machinery, keep fluid leaks off the floor and eliminate slip hazards and chemical exposure. The large 18” diameter opening captures overhead leaks both large and small. The bottom fitting connects to a standard garden hose, allowing fluids to be collected in a drum or tank. Made with a rugged, coated vinyl, the diverter ships complete with bungee cords and hooks for quick installation.
This epoxy putty tackles the toughest repair jobs. It adheres to steel, glass, masonry and most plastics and is a quick and effective solution to cracks, broken seals and leaks. simply pinch off the amount desired, knead to a uniform gray and press into place. The epoxy hardens like steel in only one hour. Sold per box of twelve.
This upscale cigarette receptacle complements high-end establishments and looks and feels like textured stone. The all fiberglass construction is weather and corrosion resistant. The design minimizes smoke exit and water entry. The fire-retardant additive in the fiberglass, and inner metal pail, help maintain fire safety. The unit can be secured with a chain or cable( not provided) to prevent theft and vandalism.
This device catches roof leaks and diverts them away from offices and equipment. The large, vinyl-coated fabric catches roof leaks and channels them to a standard hose hookup. The hose can then be directed to a proper drainage point. The heavy-duty grommets in each corner make installation quick and easy.
This economical containment for 275 (Part #2800 and 2801) and 550 ( Part # 2823 and 2820) gallon fuel and oil tanks is constructed of 100% polyethylene and will not rust or corrode and provides superior chemical and weather resistance. An optional 3/4” drain fitting is available. Use this unit with the optional Ultra-Self Bailer Part # 9935) for outdoor containment. This unit meets Stormwater, SPCC and EPA Containment Regulations. The Ultra- Self Bailer helps eliminate problems associated with...
This system allows compliance with regulations while storing IBC tanks outside. the upper roll-top door and lower swing-out doors combine to allow easy and convenient access to IBC. The unit safely stores an IBC tank with maximum dimensions of 52” x 52” x 61”. The low profile (28” height), 360 gallon containment sump allows safe material handling and dispensing. The forkliftable, lockable, all-polyethylene design will not rust or corrode. Helps meet new Stormwater Management Regulations- NPDES...
The unique, “living hinge” design of this system allows hands-free drive in/ drive out , with no need to manually raise or lower the endwalls. Once a vehicle has entered or exited, the walls automatically spring back to their vertical position. Both long sidewalls are held upright by PVC sidewall assemblies.
The Ultra-Drainguard keeps sediment and other pollutants from entering the water system with Ultra-Drainguard catch basin inserts. The oil and sediment model( Part # 9217) removes up to .87 gallons of hydrocarbons as well as dirt, sand and other contaminants. The oil and sediment plus model (Part # 9219) has the addition of X-Tex filter strips that increase oil and grease absorption by .51 gallons, offering a total capacity of 1.38 gallons of hydrocarbon removal. The trash and debris model (...
With the Ultra Hardtop Plus, multiple drums can be safely stored outdoors. The unit features separate, lockable compartments with a unique “2-way” entry system that allows quick access to all four drums. The roll-top covers can be easily lifted from waist height to access the drum tops. Swing out doors provide safety and convenience for loading and unloading drums. The low-profile (8 3/4”height) containment pallet positions drum-tops at a safe, convenient level to pour wastes into funnels or to...